DIY Metal Vertical Graphics Card Holder Bracket Mount kickstand/base With Magnetic for ATX Chassis Graphics Extension Cable
Silver / black Bracket manual:
Application: Used to fix the graphics card, it needs to be used with the graphics card extension cable, and the graphics card is external.
Scope: Support the chassis with more than 6 side baffles, or the chassis has enough space for the graphics card to stand upright.
Features: With magnetic attraction, it can be attached to the chassis. The side baffle is adjustable left and right, enough space for HDMI-compatible, DP, VGA cable installation.
Supports a chassis with a fully detachable graphics card baffle.
installation steps:
1. Put the two white washers of the accessory kit on the 12.5cm holes of the base respectively.
2. Place the right-angle graphics card extension cable on the white washer and lock it on the base with screws.
3. Lock the side baffle, place it in the chassis, and fix the bracket side baffle to the side baffle of the chassis.
4. Plug in the graphics card, plug in the video cable, and adjust the position.
20/30cm 16ACG
Pcie 4. 0 Graphics Card Extension Cable Silicone Cable
Product Description:
1, PCIE X16 4. 0 full speed extension cable.
2, Using the new generation GEN4 connector.
3, Adopt high density low impedance circuit board, gold finger countersunk 5U.
4, using fully silver-plated wire core, aluminum foil independent shielding, TPE sheath.
5, automatic production, laminating process, pulse punching process, dispensing process, injection molding process.
6, 100% channel meter test, 100% power on the actual test.
Features:
Pcie 4. 0 x16 graphics card extension cable, 64GB/S bi-directional wideband, 90 degree right angle, for ATX chassis, with silver-plated shielded cable, soft silicone protective sleeve.
ATX chassis adapter cable GEN4 silicone cable, cable can be bent and folded, suitable for computer chassis graphics card vertical installation.
Support PCI-E 4.0 devices, backward compatible with PCI-E 3.0.
M.2-mkey to PCIE X16 NVME-compatible to PCI-E 16x Extension Adapter Cable with M2 Interface for External 1050ti Graphics Cards
Introduction.
The function of this series of products is M.2 to PCIEX16, only support nvme protocol M.2 port, working in PCIE3.0X4 performance state, because M.2 does not come with 12V voltage, so this series of adapter cables need to be connected to 12V power supply, standard SATA to small 4P power supply cable. Support desktop motherboards with M.2 interface to expand the PCIE slot.
Parameters.
Name: M.2 to PCIE right angle 90 degrees
Model:
M16AC-90Degree
16ACZ-90Degree
Length: 15/20/25cm
Features
Thickened gold fingers, electroplated sunken gold 5U process, repeated plugging and unplugging is still durable, more stable signal transmission, long time resistant to oxidation.
M.2 NVME to PCIE X4 16 adapter cable.
Compatible with graphics cards, capture cards, computing cards, network cards, etc.
Optimized signal transmission to, low impedance, high temperature resistance.
Connector with metal shield, beautiful high-end, improve anti-interference ability.
Adjustable pitch of the fixed hole of the cable, and support various DIY.
Ultra-thin cable, thickness 1.4mm, the third generation of EMI shielding technology, each core independent arrangement.
No fear of interference, no fear of loss, can be bent in any direction.
Stable compatible with N card 10 series, 20 series, professional cards, capture cards, 10 Gigabit network cards, A card 470 or more.
RX5700 must be forced to set to GEN3, not the default automatic non-loss running score.
Second-hand cards, low-end cards, old cards, mining cards and other compatible probability is 70%.