Hallo,
Für sonderpreis bitte mein andere artikel sehen oder ein anfrage stelen!
zum Verkauf steht ein generalüberholtes ZF "006" Sperrdifferential Typ 188L für einen BMW E82 E87 E90 mit 25% Sperre, einer Vorspannung von 65Nm und einer Übersetzung von 3.73. Mit originales hintendeckel.
Alle Lagerspiele sowie das Zahnflankenspiel wurden kontrolliert bzw. sind korrekt eingestellt worden.Gutes Tragbild und keine Geräusche!
Lager und Sperrlamellen sind in einem guten gebrauchten Zustand. Falls gewünscht können die Lager aber gerne gegen neue ersetzt werden (Aufpreis 120€ für starker rollenlager)
Gehäuse ist rostfrei, neu lackiert und alle Dichtringe wurden erneuert.
Wir
sind auf BMW Differentiale spezialisiert. Haben schon über 600
Sperrdifferentiale und 800 oben differentiale in den letzten 10 Jahren
überholt,umgebaut bzw. verkauft.
Vertrauen Sie unserer Erfahrung!
Wir bieten Ihnen den vollen Service an. Wir reinigen und inspizieren alle unsere Differentiale. Vor dem Zusammenbau werden immer Tragbild und Zahnflankenspiel kontrolliert.
Es stehen alle gängigen Übersetzungen zur Auswahl für E82 125i, 130i, E90 325i, 330i... 3.23 - 3.46 - 3.64 - 3.73 - 3.91 - 4.45.
Bitte mail fragen.
Bitte infach anfragen und ein individuelles Angebot erstellen lassen. Siehe meine profilseite.
Folgende weitere Optionen können wir Ihnen anbieten:
- Beluftet hintendeckel - 200€
Für den Einsatz im Motorsport empfehlen wir immer das 8 Lamellen Sperrpaket . Durch die 8 Lamellen verteilt sich die Temperatur wesentlich besser und die Gefahr das es zum Überhitzungen bzw. zum Zerbrechen der inneren Zähne kommt ist auch wesentlich geringer, da die Zähneanzahl doppelt so hoch ist. (4 Lamellenpaket 46 Zähne gegen 96 Zähne beim 8 Lamellenpaket)
Bearbeitungszeit etwa 14 Tage je nach Umbau. Versandzeit etwa eine Woche.
Wir geben 2 Jahr Garantie auf unsere Differentiale!
Vielen Dank
Hello,
For special offer with lower price see my other articles or message me!
For sale a custom built BMW E82 E87 E90 LSD ZF "006" differential type 188L with 25% lock and 3.73 ratio.
Complete with normal rear cover.
Good condition lsd hub, has 65nm friction torque.
Bearings are good and pinion&crowngear backlash is right.
Teeth mesh was checked with engineers blue ink. No weird noises!
I strip, clean, inspect, paint, set pinion position, pinion bearing lash, side bearing lash, tooth mesh, tooth play, sperr pre-load. Everything is checked! I don’t sell scrap and noisy diffs.
I recommend new bearings especially on road cars. I have a very good price for roller bearings upgrade at 120€ .
Friction shims are in good used condition. The lsd will work very well.
We also have other ratios available that we can custom install for E87 125i, 128i, 130i, E90 325i, 330i... 3.23 - 3.46 - 3.64 - 3.73 - 3.91 - 4.45.
Ask for a quote.
Housing has no rust. Newly painted with new oil seals.
Send an email if you have any questions about special prices and specs. See my profile page.
Options:
Vented Rear cover - 200€.
- 40%/15% locking - 4 friction shims and assimetrical 30º Accel/60º Decel ramp angles costs 100€. – For fastroad. This is very useful on wet road. 15% Decel makes it´s easier for less experienced drivers who have less throttle/steering control. Lets you brake later into the corners at the track without oversteer.
- 50%/50% locking - 8 friction shims and 45ºAccel/45ºDeccel costs 190€. 8 shims gives better reliability. Good and durable locking action at a low price. A great compromise for frequent trackday use and/or very high torque engines with over 300nm.
- 75%/75% locking - 8 friction shims and special 30º Accel/30º Decel ramps costs 280€. – Good for rally or drift with 75% lock on Decel, lets you balance the rear of the car easier. 8 shims gives better reliability. I can set with low pre-load so it makes corner insertion more easy and safe on wet/normal driving conditions.
- 75%/30% locking - 8 friction shims and assimetrical 30º Accel/60º Decel ramp angles cost 280€. – A must have for motorsport/fast track use(Nordschleife) 8 shims gives better reliability. This is very useful on wet road. Provides faster lap times on track, lets you brake harder and later into the corner without oversteer. A good setup for big engines with high torque with over 300nm.
For Motorsport use 8 friction shims recommended. Shims can overheat and melt. Also the shim tooth can break. 8 shims help dissipate the excessive heat and have double the inner tooth number(92 vs 46) giving better reliability.
I have all the parts in stock, it takes 14 days to have the differential ready to ship and shipping time is one week.
2 year full guarantee!
International shipping available, ask for your location. See my profile page.
Thank you!