Special features following: It is beautiful in appearence. Large in capacity but small in bulk and has a complete function and stable performance, you can chose the speed that you need at the set range, and it can keep balance automatically, in adition, it has a little rate of increase in temperature and can used efficiently and widely. It is a dependable instrument for qualitative analisys of serum, plasma and immunity in hospitals or chemical and biochemical laboratories.

Model 800D

Technical Data 

• Max Speed: 4000r/min 

• Max.RCF: 1790xg 

• Type of Rotor: Fixed angle rotor45º 

• Capacity: 6 tubes x 20ml  

• Timer: 0-60min 

• Power 40 Watts

• Power supply: 110v +/-10% 60 Hz 

• N.W: 20 Lbs

1. Please read the operational manual carefully before using the machine.

2. Place empty centrifugal tube evenly before working, after working 1-2 minutes at the maximum speed, then begin to work if there is no problem. 

3. Do not touch the rotor while itis running. 

4. Do not operate the machine if the rotor is not stably loaded. 

5. Do not use the machine directly in the sunlight 

6. The value of rated parameters of the power plug offered by the consumer should be more than that of the machine and it should have well ground connection. 

7. Keep it away from high temperature machines. 

8. Do not move the machine while running. 

9. Prevent it from strong collision. 

10. Pull out the plug from the socket before changing the fuse. 

11. Do not open the centrifugal cover of the machine in order to prevent any damage by outer sundries 

12. Keep it out of reach of children. 

13. Do not clean the machine with metal material instead of soft cloths with alkaline solution. 

Using Description 

1. Place the centrifuge on the flat and strong worktable, and keep the working room clean, dry and ventilated. Indoor temperature 41-90°F is OK. 

2. Clean the rotor and container before operating. 

3. Put the test tube (with same weight) into the centrifugal hole. 

4. Put down the cover of the machine, adjust the timer as your requirement and turn on the power switch. 

5. Adjust the speed knob as your requirement. 

6. Attention Do not put anything on the cover, please clean the rotor and container after using, and put down the cover to avoid the pollutant and dirt Please open the cover and dry the container before you are going to use if the machine has not been used for a long time. 

7. Before each shutdown. The speed control knob must be placed in a minimum position. Timer zero. Turn off the power switch.

Enclosed a copy of operational manual.

Failure to follow these directions and warnings can result in serius injury and/or product damage.