Usage
A
solvent-based, fast-dry paint developed for use on plastic model kits but which
can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote
and Clear finishes are available (finish varies by colour)
Substrate
A
wide range of surfaces including most plastics, wood, glass, ceramics, metal,
cardboard, sealed plaster, sealed hardboard and more (always try on a small
test area to check suitability)
Coverage
14ml
tin covers approx. 0.3m² depending on thickness of application
Application
Brush
straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel
Thinners. Two thin coats are preferable to one thick coat. The usual thinning
ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are
designed to be polished when fully dry.
Drying time
Gloss:
1-2 hours
Matt & Satin: 20-40 mins touch dry, up to 24 hours for hard dry
Metallics: hard dry in approx. 10 days. Drying times will vary according to
ambient temperature and humidity. Recoat: 6 hours minimum (preferably
overnight)
How to clean:
Brushes:
use Humbrol Enamel Thinners
Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent
once dry.
Colours:
1: Metallic Chrome Silver
2: Matt Dark Earth
3: Gloss
4: Gloss Yellow
5: Gun
metal
6: Gloss Poly
7: Matt Dark Green
8: Gun metal
9: Satin Coal Black
10: Gloss Ivory
11: Gloss Poly Clear
12: Matt Aluminium
13: Matt Light Grey
14: Matt Flesh
15: Matt Scarlett
16: Satin White
17: Matt Sand