If purchasing samples please be aware that the quantity refers to the number of samples required.
Hanging instructions - Please read before purchasing-
When hanging this product, we recommend pasting the wall and not the wall covering. Glitter should be hung the same way as it comes off the roll, if not there will be a shading difference. You must ensure that the glitter is running in the same direction please stand back and check there is no shading difference before applying to the wall. Apply the wallpaper paste to the wall evenly. Do not allow wallpaper paste to get onto the face of your Glitter, removal will be impossible. At the top and bottom of each drop allow the Glitter to settle for approximately 30 minutes before trimming and we suggest that you check again that the glitter is running in the same direction and that there is no shading difference between each piece. The Glitter has movement therefore this will help before making any cuts. Glitter should be overlapped and spliced, overlap approx 5cm and trim through the centre. We suggest, two knifes used for each joint, replacing a new blade every joint in both knifes. Once the glitter is in place, you can use small tacks to help hold the glitter in place. Then make the finishing touches to the joint taking care not to squeeze out the wallpaper paste onto the face. The joint may be seam rolled if required. Ensure you do not overwork the joint, as this may cause damage.