Welcome
Product Description
BEVINSEE H1 LED Headlight Bulbs Conversion Kit Replacement Halogen Lamp 6000LM 50W 6000K
Integrated built-in drive, ALL IN ONE, Plug and Play, Mini Size, Complicity to more Vehicle, Low energy consumption and high brightness, 3 Years Warranty
Features:
Latest mini size CSP 1860 LED chip,A brighter light source than halogen bulb.
1:1 same luminous point and focal distance perfect fit your halogen assembly.
1:1 same luminous point and focal distance also provide clean cut offs for glare control.
1:1 same mini size as halogen bulb,5 minute easy install save your money,just plug and play.
3mm Ultra-Thin design LED surface,360° uniform light without any dark spot,longer and wider visibility.
360 degree rotatable allow you simply adjust the socket to get pefect beam pattern for your car.
Better focus and hot spot give you extra distance to react and keep you safe from car accident while driving at night.
All-in-one heat conduction with smart IC-Driver and high speed mute fan system keep the light bulb in appropriate working temperature and longer life.
70% energy saving,200% brigthness and 3 times longer service life than Halogen.
Built-in constant current CPU,instant full brightness without start-up relay.
Pure white light reflect road paint/signs better to show clearer road situation.
Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light.
Two-way heat dissipation channel:
1.All-in-one aluminum profile as heat conduction system,360 degree heat radiating.
2.High speed mute fan(15000R/Min),high air flow for faster cooling rate,and more quiet.
Package Included:
2x H1 LED Bulbs
Fitment
High Beam H1 with halogen headlamp
For Renault Master MK II 1998-2010
For Renault Master MK III 2010-2019
For Renault Laguna MK II 2001-2007
For Renault Laguna Sport Tourer MK II 2001-2007
For Renault Laguna II Grandtour 2001-2007
For Renault Megane I 1995-2004
For Renault Megane I Grandtour 1999-2003
For Renault Megane I Cabriolet 1996-2003
For Renault Megane I Classic 1996-2003
For Renault Megane MK II 2002-2016
For Renault Megane Sport Tourer MK III 2003-2012
NOTE:
Please mind to check whether the installation space is sufficient.
Some parts need to be removed before install this item to make enough installation space for it.
It may be necessary to replaced the customize dust cover of your headlamp.
This item wasn't exist self-decoding/self-Canbus【anti-flashing /anti-warning】function and DRL【Daytime running light】 function!!!
-- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases:
1, the headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked).
2, the on-board computer(ECU) reports an error, the central control panel displays an error icon or displays bulbs burns out error message.(Resistance decoding may worked)
3,The bulbs does not work. What you can do is connect the bulbs to12V DC ,it can work normally(Resistance decoding may worked).
situation 1: use this case to judge whether it need to be decoded.
situation 2:use this case to judge whether is a reverse polarity plug(turn bulb's plug 180° to insert into headlamp and turn on to test)
Feasible Solution:
1. Install the decoder; the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger.
2. Install the resistor, you need professional installation.
3. Using ODM to read the error information code of the ECU on-board computer, through programming means, correct the error information to achieve the decoding effect.
Install Cautions
FAQ 1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process. 2. Put the vehicle into park or make sure it is securely in gear. 3. Make sure to have the ignition turned off and the keys removed. 4. Be careful to avoid burns, especially when turning on or off the vehicles lighting. 5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting. 6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems. 7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb. 8. Please install car headlight dust cover to ensure the normal operation of the lamp (to prevent dust and small ribbons to reduce the chances of bulb cooling fan broken to ensure the normal operation of the cooling system) Q1: Will the bulbs suitable for my vehicle? 1. If you are not sure about your bulb model, please check the ebay fitment as the instruction above. 2. Check the owner's manual, or better yet, physically inspecting the bulb in the vehicle beforehand. 3. Contact us with your vehicle make/model/year via eBay message to ensure you get everything you need for your kit! A: All the Bevinsee LED headlight bulbs are designed with plug and play, and CANBUS ready. While there are a few sensitive vehicles might occur an error or flickers. The warning Canceller solves this problem. Q3: Neither side lighting up? Both sides flicker, flash, or work inconsistantly. A:Pls kindly Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, your car may need a relay or resistor. Q4: How to get the best light output? A: When the LED CHIPS are facing left and right(3-9 o'clock) direction and the lamp body stays vertical at 12-6 o'clock direction, you will get the best light output. Please check out the installation video on the product detail page. Q5: What should I do if there is a quality problem? A: Please send ebay message to us, we will solve any problems for you as soon as possible. Q6: The bulbs doesn't fit my vehicle. 1. The bulbs size maybe wrong, pls double check before order. 2. For some socket, such as H1, H3, H7, special bulb holder may be required. Pls send us the photo of your bulbs, bulb socket, and we will check for you. Q7: Warrning about polarity A: Please kindly check the polarity when connecting the plug. If the LED bulb does not light up or work properly after installing, please flip the plug around to reconnect. DISCLAIMER
Disclaimer: Bevinsee parts are not sponsored or endorsed by, or
affiliated with the brands its parts fit, including Porsche, Subaru,
Jaguar, BMW, Isuzu, Chrysler, Dodge, Jeep, Buick, Cadillac, Chevrolet,
GMC, Volvo, Land Rover, Oldsmobile, Pontiac, Ford, Lincoln, Mercury,
Acura, KIA, Nissan, Infiniti, International Harvester, Mitsubishi, Audi,
Lexus, Toyota, Mazda, Volkswagen, Suzuki, Saab, Honda, Alfa Romeo,
Saleen, Mercedes-Benz, Nash, Hummer, Freightliner, Datsun, Saturn,
Turner, Geo, Lada, Fiat, Daihatsu, Opel, Vauxhall, Sabra, Tesla, Ram,
Rover, Skoda, Harley, Mini, Smart, Scion, Renault, Seat, Peugeot,
Merkur, Astra, Tucker, VW, Routan, Tiguan, Touareg, Jetta, Gti, Passat,
Golf, Bosch, Denso, Holden, Chery, Mercedes Benz, Holden Special
Vehicles, Hyundai, Trabant, Citroën, Yamaha, Polaris, Can-am, Arctic
Cat, Kawasaki, Ski-Doo, Harley-Davidson, KTM, Duke, Husaberg, Husqvarna,
Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli,
Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco, etc.
Payment Policy
Shipping Policy
Return & Refund
Feedback
About Item
Customer Satisfaction
|