1-440W Universal Dimmer LD440, Trailing Edge

Properties:
The Low-power dimmer LD440 is controlled by up to 5 retractive switches.
• Starts at 1W! 
• Can be mounted in the wall box behind the switch 
• Can be mounted using the mounting brackets 
• Used for dimmable LEDs from 1W up to 440W (E27, E14, GU10) 
• Used for dimmable CFLs and CCFLs from 1W up to 440W (E27, E14, GU10) 
• Used for 230 V halogen-lamps up to 440W 
• Used for dimmable LED-drivers from 1W up to 440W 
• Used for low voltage halogen lamps up to 440W over electronic transformers for trailing-edge control 
• Used for incandescent lamps up to 440 W 
• Has adjustable minimum dimming level, which is handy when different loads of low-power lamps are connected. 
• Has memory function and retains the last-set light level when turned off/on. Also applies when the dimmer has been de-energized. 
• Can be dimmed with up to 5 parallel retractive switches 
• With soft start 
• With thermal overload 
• Several LD440 cannot be controlled by the same retractive switch 
• Retractive switch with signal lamp must not be used 

Function: 
On / Off - A short press. The dimmer will start with the last used light level (memory function) 
Dimming up / down - Keep the button pressed until the desired level is reached. 

Technical data: 
Voltage: 230 V +/-10% 50 Hz
Max current: 0,96 A
Minimum load: 1W (el. transformer: see its min. load)
Maximum load: 440W
Protection class: IP20 (indoor)
Size: Ø56x23 (mm)