Vintage Creative Sound Blaster AWE64 CT4520 16-bit ISA sound card
pulled from a working system
Specifications:
Manufacturer Creative Labs Inc.
Model Sound Blaster AWE64 Value CT4520
Bus interface ISA 16
Games compatibility Sound Blaster, Sound Blaster Pro, Sound Blaster 16, Sound Blaster AWE32
Audio inputs/outputs line in jack; microphone in jack; line out jack; speaker out jack, joystick/MIDI port
Wavetable synthesizer Emu Systems EMU8000 wave-table synthesizer; 32-voice polyphony and multi-timbral capability; 16 MIDI channels
MIDI interface joystick/MIDI interface (adapter required)
Microphone type(s) supported non-powered
Memory
Onboard RAM 512 KB; expandable up to 24 MB with memory upgrade modules
Audio Performance
Signal-to-noise ratio better than 80 db (A weighted)
Frequency response 20 Hz 22 kHz (+/1 1 dB)
Sampling rate for playback/ recording (stereo) 5 kHz 44.1 kHz
Digital audio processor EMU8000
Dimensions
Card size 7 3/16 in x 4 1/16 in
Electrical
Microphone impedance 600 Ohms
Line-in impedance 47 KOhms
CD audio-in impedance 50 KOhms
Microphone sensitivity 10 200 mVpp
Line-in sensitivity 0 2 Vpp
CD audio-in sensitivity 0 2 Vpp
AD/DA resolution 16 bits
Output power (max.) 4 watts @ 4 Ohms PMPO (Amp out)
MTBF >60,000 hours
Overview
The Sound Blaster AWE64 Value (Model CT4520) is a Plug and Play 16-bit ISA audio board.
Features
Features of the advanced WavEffects synthesizer include the following:
64-voice polyphony
16 parts multi-timbral
1 MB ROM of general MIDI samples
512 KB built-in DRAM
Features of the stereo music synthesizer include the following:
4-operator 11-voice or 2-operator 20-voice stereo music synthesizer
Compatible with previous Sound Blaster music synthesizer chips
Features of the stereo digitized voice channel include the following:
Full duplex
16-bit and 8-bit digitizing in stereo and mono modes
Programmable sampling rates, 5 kHz to 44.1 kHz in linear steps. Your audio applications may support only selected ranges of sampling rates.
High and low DMA channels using a single interrupt for audio playback and recording
Dynamic filtering for digital audio recording and playback
Features of the built-in digital/analog mixer include the following:
Mixes sources from digitized voice and inputs from MIDI devices, CD Audio, Line In, Microphone, and PC Speaker
Selectable input source or mixing of various audio sources for recording
Features of the volume control include the following:
Software volume control of master volume, digitized voice, and inputs from MIDI device, CD audio, line in, microphone, and PC speaker
Master volume at 28 levels in 2 dB steps
Digitized voice and inputs from MIDI device at 26 levels in 2 dB steps
All other sources at 32 levels in 2 dB steps
Treble/bass control at 15 levels from -14 dB to 14 dB in 2 dB steps
Full software control of fade-in, fade-out, and panning
Features of the built-in stereo power amplifier include the following:
Six watts RMS per channel with four ohms stereo output
Internal or external audio output amplifier
Features of the 3D stereo enhancement technology include the following:
Increased depth and breadth in perceived audio
Enhances mono and stereo audio output
Independent of speaker quality
Independent of setup configuration (for example, placement and alignment of speakers with the listener)
The sound card works with the following standards:
Microsoft Windows 95, 98, ME, 2000, XP (Home and Professional)
Microsoft Windows NT
Microsoft Windows 3.1
Microsoft MS-DOS 5.0 or higher
General MIDI
MPC3
Plug and Play