Notice:
For the first use, you need to activate the BMS first, and you can activate the BMS in the following way

Two activation methods for the first PACK:
(1) B- and C- wires are short-circuited once
(2) Activate after charging

Discharge:
--Single battery over-discharge voltage: 2.7V±0.08V
--Single battery over-discharge recovery voltage: 3V±0.08V
--Over-discharge delay:0.5S-1.0S
--5A version continuous working current: 5A
--5A version instantaneous protection current: 10A
--8A version continuous working current: 8A
--8A version instantaneous protection current: 20A
--Overcurrent Recovery Conditions: Charge Recovery/Load Disconnect
--Short circuit recovery conditions: charge recovery / disconnect load

Charge:
--Single battery overcharge voltage: 4.25V±0.025V
--Single battery overcharge recovery voltage: 4.15V±0.025V
--Overcharge delay:0.5S-1.0S
--5A version continuous charging current: 3A
--8A version continuous charging current: 6A
--Charger voltage: 25.2V

Parameter:
--Wiring method: same port
--Balanced voltage: 4.125V±0.015V
--Balance current: 42MA
--Working power consumption: ≤20uA
--Conduction internal resistance of the main circuit: ≤10mΩ
--Temperature range: -40 to +80°C
--Disconnection protection: Yes