eBay

Description:

XH-M602 Control Battery Charging Control Module AC 220V

Product Introduction:
1.Name: numerical control battery charging control module
2.Model: XH-M602
3.Input Voltage: AC 220V
4.Display Precision: 0.1V
5.Control Precision: 0.1V
6.Output Type: output switch
7.Voltage Tolerance: +/-0.1V
8.Application Fields: for 3.7-120V lithium battery or storage battery
9.Size: 86*58*24mm

Package Included:
1PCS

XH-M601 Battery Charging Control Board 12V

Product Introduction:
1.Name: 12V charger power control board
2.Model: XH-M601
3.Power Supply Voltage: 13.8-14.8V
4.Relay Operating Voltage: 12.4V
5.Relay Disconnect Voltage: 14.8V
6.Voltage Tolerance: +/-0.1V
7.Voltage Detection Way: DC voltmeter
8.Charging Type: 12V storage battery
9.Potentiometer Adjustment: RP1 RP2
10.Size: 50*32*18mm

Potentiometer Adjustment:
1.RP1: adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher, counter-clockwise becomes lower)
2.RP2: adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower)

Package Included:
1PCS

XH-M603 Charging Control Module 12-24V

Product Introduction
1.Input Voltage: DC 10-30V
2.Display Precision: 0.1V
3.Control Precision: 0.1V
4.Output Type: direct output
5.Voltage Tolerance: +/-0.1V
6.Application Fields: 12-24V storage battery
7.Size: 82*58*18mm

Package Included:
1PCS

XH-M604 Battery Charger Control Module DC 6-60V

Product Introduction:
1.Name: numerical control battery charging control module
2.Model: XH-M604
3.Input Voltage: DC 6-60V (max 80V)
4.Display Precision: 0.1V
5.Control Precision: 0.1V
6.Output Type: direct output
7.Voltage Tolerance: +/-0.1V
8.Application Fields: 6-60V storage battery
9.Size: 81*54*18mm

Using Method:
1.Set Starting Voltage: in normal display voltage state, press the button will display start charging voltage; long press for 3s the digital tube will flash; you can start or stop button to set starting up charge voltage value
2.Set Stop Voltage:in normal display voltage state,press the button will display stoping charge voltage; long press the button for 3s the digital tube will flash; you can start or stop button to set stoping charge voltage value
3.Factory Reset: in power on state press the start/stop button at the same time, digital tube will display 888; that represents factory reset settings

XH-M609 Overdischarge Battery Protection Module

Parameters:
1. Product name: overdischarge battery protection module
2. Model Number: XH-M609
3. Power supply voltage: 12 V-36 V battery
4. Output voltage: equal to the supply voltage
5. Control accuracy: 0.1 V
6. Power consumption: less than 1.5 W
7. Scope of application: various accumulators, lithium batteries
8. Net weight: 28g
9. Size: 57 * 42 * 19 mm

Features:
1>. automatic shut off.
2>. protection against discharges.
3>. extend the life of your battery

Note:
Manual measuring, please allow 1-2cm error,thank you.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!!

Package Included:
1 x Protection Module(No Retail Package)

Payment Method
Returns Policy

Payment Method

Returns Policy

All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.