Stance+ 25mm (4x100 to 5x130) PCD Adapters for BMW 3 Series
These adapters will only fit vehicles with an original PCD of 4x100, a centre bore of 57.1mm and that use M12x1.5mm bolts.
They will change your PCD to 5x130 with a centre bore of 71.6mm and a bolt thread size of M14x1.5mm.
IMPORTANT
Please note that using a 20mm (or thinner) adapter may require you to shorten your standard wheel bolts that you are using to bolt the wheel to the adapter. Failure to do so may result in you stripping the threads or buckling/damaging the adapter. Always test fit the adapter to the back of the wheel before bolting the adapter to your hub to ensure the wheel bolts you are using do not poke through the back of the adapter and foul on the hub. If they do you will need to shorten the wheel bolts. If you are unsure please contact us for advice.
PROFESSIONAL FITTING IS STRONGLY RECOMMENDED.
Stance+ PCD adapters allow you to fit wheels with different stud patterns/PCD to your car. Simply bolt the Stance+ adapter to your wheel hub using the bolts supplied (torqued to manufacturers settings). Your new wheel then bolts on to the adapter using M12 or M14 wheel bolts depending on which wheel/adapter you have purchased. Please note that some adapters change the bolt size so you may have to purchase new wheel bolts.
Manufacturers torque settings should always be used, over tightening will result in damage to the adapter.
We sell over 250,000 performance car parts online! Sadly, it is impossible for us to stock all of these parts all of the time and ultimately this would only lead to increased prices.
All of our listings offer an estimated delivery date which is made up of the dispatch timeframe and the delivery service used but please understand that these dates are not guaranteed and occasionally delays do happen. Sometimes a part may have to be manufactured or even imported from another country for you. Where we are informed of a delay we will do our best to keep you updated.
In rare circumstances we may even have to cancel an order if a part is no longer being produced by the manufacturer and we cannot source it for you. We cannot guarantee product availability. If you wish to check please contact us before ordering.
Please do not schedule any work on your vehicle until you have received and fully inspected your parts.