Before caliper seal replacement, this tool allows the inboard piston(s) to come out so they are easy to remove.
3D printed by Photoprints92 in Wales from recycled PETG with 70% infill as per Hope guidance
Colour - Hopetech Lime Green so it doesn't get lost in your bike toolbox!
Available for:
E4/RX4+ Caliper
V4 Caliper (on separate listing)
X2 Caliper (on separate listing)
Instructions:
- The brake must be fully bled.
- Remove the pads, install the U shape tool over the front ‘half’ of the caliper body, making sure the thinner leg of the U shape tool is in the pad location.
- Pump on the master cylinder until the inner piston(s) come in contact with the tool.
- Remove the tool and gently remove the pistons.
- The outer piston(s) will be removed once bore caps are unscrewed.
- The caliper will be now ready for seal replacement.
Note:
Both inner pistons need to be pushed into their bores
E4 and RX4+ use the same tool
Postage
Due to their size these Piston Tools need to be sent as a Small Parcel so they cost a little extra sorry