I make a personal video clip to each buyer of the adapter with the chip, in this video clip I show a completely programmed chip!
All video recorded for buyers to look at my YouTube channel
1. You can control the lens aperture of the camera. You can select any aperture through your camera!
2. The chip can operate in aperture priority mode A.
3. The chip can operate in mode M, P, and other modes.
4. Chip allows you to select any point of focus.
5. The chip provides the focus confirmation sound and light signal, as the autofocus lens Nikon.
6. The chip will not take a picture until no focus confirmation! (AF trap)
AF Chip "Dandelion" for Nikon Compatibility
There are only three film cameras that Dandelion is not compatible with: F4, F60 and F90x. It works with all other models perfectly. Programming mode is not compatible with F5 and D1X/H models.
Before making a purchase please contact the seller for telling him how you want to use a chip and what lens or adapter you want it to be installed on.
Please give the following information:
1. The name of the lens or the adapter name, such as Helios 44-2 58mm/f 2-16
2. Write the name of your camera, such as Nikon D5100
You get a fully working chip!
1. I make the free programming of each chip.
2. I give detailed instructions for installing the chip to the lens or adapter!
3. Chip can not be set on the lens with the aperture ratio of 1.2
When buying a chip select:
1. The name of the lens, such as Helios 44-2 58mm/f 2-16
2. Attach a photo of your lens, made from the bayonet mount
All the customers receive pictures made with programmed chip parameters and detailed instructions for use. After-sales support is free.
The chip is very fragile! In case the customer uses the product improperly and the chip has been mechanically damaged the customer cannot bring claims against the seller.
How to photograph with a dandelion chip on lenses without a diaphragm control lever
1. In the camera menu, you need to select the shooting mode AF-S
2. Select the aperture value in the camera
3. Select the same aperture value on the lens
4. Select the focus point (for example, center point)
5. Look at the viewfinder
6. You can fully press the shutter release button
7. Turn the focus ring
8. The camera shutter will work as soon as the subject of the shot is in focus. (This is how the focus trap works).
9. When the focus appears, you will hear the focus confirmation sound and see the focus confirmation light at the selected focus point.Dandelion ( programmable chip ) is designed to be installed on adapter rings and manual lenses so that they could then be used on Nikon AF digital and film cameras.
Because Dandelion is about the same size as a match, it can be fitted to any existing adapter ring or lens with Nikon F bayonet mount. Lenses with such bayonet mounts have been produced since 1959.
With Dandelion fixed on the ring, a camera obtains exposure metering function. If your camera has a 3D matrix meter, it will function as well.
Precision focus will be acknowledged by a sound and light signal. On the screen you will also find highlighted spots that got into focus area. Junior series digital cameras will provide an acknowledging beep.
With Dandelion installed on a lens with an automatic AI-S aperture, the aperture will be controlled through the camera similar to autofocus lenses. This is one of Nikon's strongest points: you don't have to care about aperture when using an old manual lens.
Dandelion has another peculiar feature of "hard" shutter block before acknowledging signal. When pressing shutter release button up to the stop, the shot is made immediately in response to the signal. This is useful when shooting fast-moving objects.
Dandelion's most important feature for eager photographers is the possibility to change its parameters without taking it off the camera. You can alter focal length and other parameters pre-set in Dandelion. See programming instructions.