If you need to return the item for some reasons, pls contact us via ebay message at the fist time, we will try our best to help you and arrange the return for you. Pls do not send back directly without permission.Thank you!!!

Super ICOM PRO N3+ Fit For BMW Full Configuration Plastic Box

The N3+ is developed on the basis of for BMW's special inspection device A1, A2, A3 and N3. On the basis of inheriting the advantages of these products, N3+ optimizes and upgrades them. It is 100% compatible with the original for BWM special inspection software without any software changes, and J2534 and DOIP are added on the basis of the special inspection. 

The N3+ is the same as the N3, one code for one machine, and the wireless is bonded with the machine code, which is convenient for customer service and product tracking.

Highlights:

1. Supports WiFi and USB connection, Compatible with DoIP protocol 

2. Firmware update online

3. Replace ICOM Next and ENET cable. Fully compatible BMW I*COM I*STA-D, I*STA-P, INPA, WinKFP, E-sys etc engineering software

4. With OBDII to 20-PIN cable for old BMW and 10-PIN cable for BMW motorcycle

5. Can be used as J2534 Passthru device for ODIS HDS TIS GDS2 SDD etc

Product Features:

Synchronized Upgrade with the Original Factory

The firmware of the N3+ product has been refreshed to version 147 when it leaves the factory. The firmware upgrade is synchronized with the original factory and the steps are the same. If there is an update to the firmware in the future, customers can download it from the official website of the original factory and then upgrade.

Wired + Wireless Mode

The communication interface between the N3+ and the computer adopts wired + wireless mode.

Wired mode: Wired adopts standard USB3.0 interface. Compared with the old RJ45 network port of the original factory, we have better compatibility and stronger applicability for existing general-purpose computers and tablets. (The first time you need to set the dedicated IP address)

Wireless mode: The latest low-power consumption design is used for wireless mode, which reduces the heat of the product in use and greatly improves the speed and stability of wireless communication. After one wireless connection, it can be automatically connected after booting. (Wireless needs to be wired disconnected.)

Dual Heat Dissipation Design

The N3+ product adopts a dual heat dissipation design of a fan and a heat sink, which has not yet appeared on the market in the for BMW special inspection and greatly improves the durability and stability of the product's communication in high-temperature environments.

Optimized Main Cable

Because the communication protocol of N3+ includes K line, CAN line and local area network (DOIP) communication, in order to ensure the stability of communication, we have optimized and improved the main cable for testing, which is not an ordinary OBD cable.

On the basis of N3, the N3+ adds a one-key switch button, which can be freely switched between the special inspection and J2534 & DOIP software by pressing and holding it for 3 seconds.

Product Comparison Chart:
 

Product Functions: 

N3+= for BMW special inspection+J2534+DOIP+WIFI

1. for BMW special inspection device(NEXT A3)

N3+ adopts the same technology as for BMW's special tester, and its comprehensive performance is much higher than similar products. All fpr BMW's test software can run 100% without any problems, and all test results are 100% consistent with the original factory. The test scope includes For BMW cars, motorcycles, For Rolls Royce and so on.

2. J2534 device

N3+ can use the J2534 protocol to read through after switching with one key. It is compatible with the 6-pin and 14-pin CAN communication and the 7-pin K-line communication of the OBD port. It can use For V-olkswagen, For Mercedes-Benz, For Toyota, For Honda, For Land Rover and other special inspection software with J2534 interface.

3. DOIP device

N3+ can use DOIP network communication protocol after one-key switching, which can solve the problem that V-olkswagen 5054 and For Mercedes-Benz C4 cannot test new cars without DOIP.

4. WIFI device

When N3+ uses the for BMW special inspection software, it is more convenient and faster to use WIFI, without any configuration on the computer. After one-key switching, WIFI can use for BMW's mobile phone hidden functions activation and test software, which can be used to test the DOIP of for Mercedes-Benz For V-olkswagen.

Package Includes:

1pc x SUPER ICOM PRO N3+ main host

1pc x OBD cable

1pc x USB cable（2 meters long）

1pc x 20-pin round head cable

1pc x 10-pin motorcycle cable