eBay

weBoost Connect 3G with Omni Antenna

Elevate your mobile connectivity with the weBoost Connect 3G Omni 472105. This comprehensive 3G booster kit is designed to keep you connected, ensuring better voice and data quality with fewer dropped calls, improved voice clarity, and faster uploads and downloads.

One of the standout features of this booster kit is its ability to amplify cell signals by up to 32 times. Whether you're at home, in the office, or on the road, you can experience a significant boost in signal strength. Say goodbye to frustrating dropped calls and enjoy crystal-clear voice quality.

This booster is particularly well-suited for larger spaces, with the capability to enhance 3G voice and data signal quality for buildings up to 5,000 square feet. No matter where you are within this range, you can enjoy a reliable and consistent connection.

The Connect 3G Omni is also incredibly versatile, offering compatibility with all major U.S. networks. Whether you're with Verizon, AT&T, Sprint, T-Mobile, US Cellular, Straight Talk, or another carrier, this booster has you covered.

Installation is a breeze, thanks to the inclusion of all the necessary components in one package. You won't need to be a tech expert to set up this booster.

weBoost Connect 3G with Omni Antenna Features:

Enhanced Signal Strength

Wide Coverage

Compatible with All Major Carriers

Easy Installation

FCC Certified

In the Box:

Connect 3G Booster
Inside Panel Antenna
Outside Omni Antenna
AC Power Supply RG6 coax Cable

Coverage Area

Many variables impact the total coverage area of a signal booster system. The following are estimates only and may not be accurate in any individual situation.

If you have an existing strong 5-bar outside signal, you may get up to 3,500 sq ft of coverage inside*
If you have an existing 3 to 4-bar (-90 dB) outside signal, you may get up to 2,500 sq ft of coverage inside*
If you have an existing 1 to 2-bar (-100 dB) outside signal, you may get up to 250 sq ft of coverage inside*

Supported Carriers

All carriers that use the standard dual band frequencies (800 MHz & 1900 MHz) for voice and 3G data, including:

AT&T 2G/3G/4G HSPA+ (shows as 4G on your phone)
Verizon 2G/3G
Sprint 2G/3G
US Cellular 2G/3G
Alltel 2G/3G
T-Mobile 2G/3G
Major Canadian Carriers 2G/3G
All other carriers using 800 MHz and 1900 MHz
Will not boost 4G LTE for any carrier

Kit Includes

weBoost Connect 3G 65 dB Dual-Band Amplifier
311201 - Omnidirectional Outside Antenna with F-Female Connector
311155 - Wide-Band Panel Antenna with F-Female Connector
950620 - 20' White RG6 Low Loss Coax Cable (used to connect the outside omni antenna to the amplifier)
2 x 15' White Low Loss Cables with Barrel Connector
8" Flat Coax Cable
Antenna Mounting Hardware
Installation Manual

Installation Overview

The weBoost Connect 3G Omni kit is easy to install for anyone that's a bit handy. But if you're not comfortable getting up on your roof to mount an antenna, it may be best to find an electronics installer or a handy friend. We always recommend doing a soft install where you don't permanently mount anything or drill any holes until you know the system will work for you and you've identified the best locations for the antennas. To install, just follow these 3 steps:

To start, you'll need to find a place on the roof of your home or office to mount the outside omnidirectional antenna. Generally, the higher you can mount it, the better. Otherwise, look for the place on the roof that receives the best existing signal. Connect the 20 ft. RG-6 coax cable to the antenna and run it into the house. You may be able to enter through a vent or a soffit; otherwise, you may have to drill a hole.
With the cable inside, connect it to an in-line lighting protector if you purchased one, and then to the amplifier. To the inside antenna port on amplifier, connect the 30 ft. cable and then connect the inside antenna. If you have an attic, the easiest installation method is typically to have the amplifier and inside antenna in the attic with the panel antenna face down on the floor in the middle of the house. If you don't have an attic, you can mount the panel antenna on the ceiling in the middle of the house, or on a wall.
Once all of the components are connected, plug in the amplifier and see if you get any warning lights. A red light indicates that the inside and outside antennas are too close together. Unplug the amplifier and then increase the separation between the antennas and try again. If you can't increase the separation, you can turn down the gain on the amplifier which will also decrease the total coverage area. For any other errors, consult the manual.

Benefits-

Everything you need is in the box, just set it up and go

Reduces dropped calls and increases data speeds

Works wirelessly so you can use your cell phone like you always do

Supports multiple phones and data devices simultaneously

Adjustable per-frequency gain control makes installation easier

Contains carrier protection technologies to guard against overload and oscillation

Amplifies the signal both to and from the cell carrier

Boosts both 800 (850) MHz Cellular and 1900 MHz PCS Bands

Extends the battery life of your phone

Made in the USA

FCC and IC type accepted

* The actual coverage area of a signal booster is dependent on many factors including existing outside signal strength, obstructions between you and the cell tower, the materials used in your home or office, the layout of the area you need to cover with a boosted signal, and other factors. The approximate coverage areas listed above are estimates. Actual coverage area will vary based on these and other factors.



Number of Inside Antenna(s)	1 Inside Antenna
Inside Antenna Type	Directional
Outside Antenna Type	Directional
Max Coverage Area	Up to 3,500 sq ft
Frequency	800MHz, 1900MHz
Gain	65dB / 65dB
Impedance	75 ohm
Power Requirements	110-240 V AC, 50-60 Hz, 8 W