Introduction
CMS60D Pulse Oximeter adopts
Photoelectric Oxyhemoglobin Inspection Technology in accordance with Capacity
Pulse Scanning & Recording Technology, which can be used to measure SpO2 and
pulse by finger. It is applicable for use in hospital, oxygen bar, community
healthcare and exercise healthcare(It can be used before or after exercise, but
not recommended to use during exercising).
Features
1.Small in volume, light in
weight and convenient to carry.
2.Easy and simple to operate, low in power
consumption.
3.With function menu.
4.Display of SpO2 value.
5.Display
of PR value and bar graph.
6.Display of pulse waveform.
7.Adjustable
screen brightness, PR sound indication.
8.Review function.
9.Clock
function.
10.Audible prompt for over-limit and low battery.
11.Battery
status indication.
12.Low battery indication.
13.Storage function for SpO2
and PR values, and data stored can be uploaded to PC.
14.Real-time data can
be uploaded to PC.
15.External SpO2 probe can be connected.
Performance
Display mode: color
display
SpO2 measurement range: 0 % ~ 100 %(resolution: 1 %)
Accuracy:
70%~100%: ±2%
0%~69%: unspecified
PR measurement range: 30 bpm~250
bpm(resolution: 1 bpm)
Accuracy: ±2 bpm or ±2 %, whichever is
greater.
Measurement performance in weak filling condition: SpO2 and pulse
rate can be shown correctly when pulse-filling ratio is 0.4 %. SpO2 error is ±4
%, pulse rate error is ±2 bpm or ±2 %, whichever is greater.
Resistance to
surrounding light: The deviation between the value measured in the condition of
man-made light or indoor natural light and that of darkroom is less than ±1
%.
Power consumption: ≤ 100 mA
Voltage: DC 3.0 V
Power supply: two AA
batteries
Continuous working time: 44 hours in theory
Safety class:
internally powered equipment, type BF applied part
Physical characteristic
Dimension: 110
mm(L) × 60 mm(W) × 24 mm(H)
Weight: about 120 g(including battery)