CS-NRI ESN-202-7IN (previously known as Syntho-Steel) - Steel-Reinforced Epoxy Putty (NSF61 & BS6920 compliant for drinking water contact)

CS-NRI ESN-202-7IN (previously known as Syntho-Steel) is a two-part, steel reinforced epoxy putty. It cures in minutes and can repair most anything made of metal, masonry, wood, ceramic, glass and plastics. ESN-202-7IN (previously known as Syntho-Steel) contains no solvents, is non-toxic and easily prepares for application. Unlike liquid epoxies, ESN-202-7IN will not drip or sag and will set on wet surfaces. NSF61 and BS6920 compliant for use with potable water. When fully cured the material produces a durable, resilient bond resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases. ESN-202-7IN is widely used for pipeline repairs in various industries. Typical Applications: Repair leaking water pipes Seals leaks in oil and water tanks Plug holes and seals Fill corrosion voids Designed for low pressure leaks Typical Applications Impact Protection Emergency Repair Corroded Pipes Irregular pipe fittings Force Mains and gravity lines Joint and Tee repair Underwater repair and splash zone Physical Properties Temp Sustained/Continuous: 250°F (121°C) Temp Spikes/Intermittent: 300°F (149°C) Density: 2.2 lb/gal, 18.5gm/cm3 Electrical Resistance: 30,000mega-ohms Solids Content: 100% Chemical Resistance: Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases. Length: 7" Weight: 115g Physical Properties: Density : 15.8 lb/gal (1.9 gm/cm3) Compression Strength : 18,000 psi or 1241 bar Tensile Strength : 6000 psi or 413 bar Modulus of Elasticity : 6x106 psi Shear Strength : 700 psi (48 bar) Hardness (Shore D): 85 Maximum Use Temperature : 300 degrees F (149 degrees C) Electrical Properties : Volume Resistivity : 5X1016 ohm-cm Dielectric Strength : 400 volts/mil @0.125 in Working Time 5 Minutes at 75°F (24°C) Shelf Life 24 months with recommended storage Storage Conditions Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials, food and drink. Storage at temperature between 64°F and 86°F. Keep away from humidity and water. Keep container tightly closed and sealed until ready for use.

CS-NRI ESN-202-7IN (previously known as Syntho-Steel) - Steel-Reinforced Epoxy Putty (NSF61 & BS6920 compliant for drinking water contact)

CS-NRI ESN-202-7IN (previously known as Syntho-Steel) is a two-part, steel reinforced epoxy putty. It cures in minutes and can repair most anything made of metal, masonry, wood, ceramic, glass and plastics.

ESN-202-7IN (previously known as Syntho-Steel) contains no solvents, is non-toxic and easily prepares for application. Unlike liquid epoxies, ESN-202-7IN will not drip or sag and will set on wet surfaces. NSF61 and BS6920 compliant for use with potable water. When fully cured the material produces a durable, resilient bond resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.

ESN-202-7IN is widely uséd for pipeline repairs in various industries.

Typical Applications:

  • Repair leaking water pipes
  • Seals leaks in oil and water tanks
  • Plug holes and seals
  • Fill corrosion voids
  • Designed for low pressure leaks

Typical Applications

  • Impact Protection
  • Emergency Repair
  • Corroded Pipes
  • Irregular pipe fittings
  • Force Mains and gravity lines
  • Joint and Tee repair
  • Underwater repair and splash zone

Physical Properties

  • Temp Sustained/Continuous: 250°F (121°C)
  • Temp Spikes/Intermittent: 300°F (149°C)
  • Density: 2.2 lb/gal, 18.5gm/cm3
  • Electrical Resistance: 30,000mega-ohms
  • Solids Content: 100%
  • Chemical Resistance: Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases.
  • Length: 7"
  • Weight: 115g

Physical Properties:

  • Density : 15.8 lb/gal (1.9 gm/cm3)
  • Compression Strength : 18,000 psi or 1241 bar
  • Tensile Strength : 6000 psi or 413 bar
  • Modulus of Elasticity : 6x106 psi
  • Shear Strength : 700 psi (48 bar)
  • Hardness (Shore D): 85
  • Maximum Use Temperature : 300 degrees F (149 degrees C)

Electrical Properties :

  • Volume Resistivity : 5X1016 ohm-cm
  • Dielectric Strength : 400 volts/mil @0.125 in

    Working Time

    • 5 Minutes at 75°F (24°C)

    Shelf Life

    • 24 months with recommended storage

    Storage Conditions

    • Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials, food and drink. Storage at temperature between 64°F and 86°F. Keep away from humidity and water. Keep container tightly closed and sealed until ready for use.

      Shipping info

      Click the Shipping & Payments tab above the listing description for more info

      Click the Shipping & Payments tab above the listing description for more info!

      Additional delivery notes

      PICK UP OPTION

      Sorry, our items are NOT available for pick-up.

      PAYMENT


      Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

      We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

      We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

      The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

      Thank you for shopping with us on eBay!

      Paying via Direct Deposit

      Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase.

      Additional Information

      No additional information at this time

      Ask seller a question

      To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.

      Ask seller a question

      © Perigee Direct

      Click the Shipping & Payments tab above the listing description for more info

      Accepted Payment Methods

      Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart.

      We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.

      We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).

      The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws.

      Thank you for shopping with us on eBay!

      Returns are accepted

      Items must be returned within 30 days of the auction ending

      Buyer will pay for return shipping.