Product description:
30 LED motion sensor wall lights use passive infrared technology with 120-degree omnidirectional motion sensing. It can be installed indoors and outdoors, without wiring and without holes. Make your life bright and convenient.
3 Secondary dimming mode: Press the [123] button to adjust the brightness: 10LED, 20LED, 30LED brightness, the indicator light will turn green and blink, and the human motion in night light can be detected. When a movement within 10ft / 120 ° is detected, the LED wall light will immediately light up. If no motion is detected, the light automatically turns off after 15 seconds.
Always on mode: Press and hold the button labeled [123] for three seconds, the indicator light will turn red, and it is always on. You can use the wireless motion sensor LED light as a flashlight and table lamp.
It remembers your last brightness setting and doesn't need to be adjusted every time to keep your child safe.
Note: When the LED wardrobe light is blinking, it proves that the battery is low and needs to be charged.
Durable and environmentally friendly: Our premium motion sensor lights are made from an aluminum alloy housing that is durable and stylish. The motion sensor light has a built-in rechargeable battery, no additional AAA battery is needed, energy saving and environmental protection, saving money . When the LED closet light blinks, it proves that the battery is low and needs to be recharged.
Scope of application: This multifunctional cabinet light is very suitable for bedrooms, bedrooms, cabinets, corridors, workshops, basements, garages, stairs, fuel tanks, doors, garage entrances, hotels, camping, night reading and other places.
Specifications:
Induction method: human infrared sensor
Induction control: built-in light sensor
Induction distance:> 3m
LED quantity: 20pcs (10pcs white + 10pcs warm white)/30pcs(white)
Induction angle: 120 degrees
LED life: more than 80,000 hours
LED brightness: 350 lumens
Light color: white light
Working current: 120 mA (60 mA for white light)
Working voltage: DC3.7V
Battery full use times: more than 600 times
Delay time: 15 seconds
Operating temperature of lamp: -10 ~ 50 ℃
Shade Material: Aluminum + ABS
Power and Plug Description: battery-powered
Switch Installation: Type 3m sticker
Note:
1. Do not install 2 lights too close to each other. Light may cause another does to not work.
2. This light can only be turned on in a dark environment.
Packing list:
1 x Motion sensor closet light
1 x 3M tape
1 x USB cable
1 x User Manual