DRAGON 1/35 3606 M48 AVLB Armored Vehicle Launched Bridge Plastic Model Kit
- Reproduce bridging tanks of the American military overflowing presence with a bridge!
- Added new money type
[About actual vehicle]
- Tanks were one of the weaknesses that prevented the mobility of the grooves, trenches and rivers that exceeded the length of the track since its appearance.
- Engineers installed bridges to deal with them, but as more mobility was required, it was a cross battle tank that was developed.
- Utilizing the bodies of the tanks, on top of which they are replaced with weapons such as turrets and equipped with bridge parts.
- We set up a bridge by advancing to the front line and rapidly installing a bridge that can also pass tanks and secured a course.
- One of the bridge tank M48AVLB developed by the United States in the 1950s.
- Appeared in 1952, loaded with a bridge folded in half folded on the basis of the body of the M48 series that gathered the soldier's trust with success in the Vietnam War etc.
- We adopted a scissor-type mechanism to pass to the other side while spreading the bridge by hydraulic piston after arriving at the site.
- The stretched bridge had a length of 19.2 m and a width of 4 m and had the ability to withstand a weight load of 60 tons.
- Vehicles remodeled based on the M48A2 type were the center, but vehicles based on the M48A5 type were also made and deployed and operated not only in the US army but also in NATO and others.
[About the model]
- The model is a plastic model assembly kit that reproduced the M48AVLB on 1/35 scale, a cross-battle tank remodeled based on M48 patton after the war.
- Each type has already been launched from the dragon and based on the M48 kit which is highly evaluated for its finish, the upper part of the car body and the bridge parts are developed with new parts and combined.
- In addition to its frame structure, bridge parts also reproduce the details of the side bolt and tread surface firmly.
- In addition, the mechanism of the scissor type bridge is modeled in detail to the hydraulic cylinders, lines and cables.
- Because it can be assembled at arbitrary position between the storage state and the expansion state, as well as it corresponds, it corresponds also to a wide scene setting etc etc.
- The car body equipped with this bridge mechanism newly developed the upper part of the car body.
- In the part where the turret has been removed, the two cupola for Commander and operator and the bridge seat on the engine deck are modeled accurately, and it is a mechanical finish.
- The lower part of the car body is integrally molded using a slide mold.
- The texture of the casting skin is expressed and the weight feeling is also sufficient.
- Military fans can not miss models full of presence with bridges.
- The 30th anniversary celebrates the increasingly mature dragon.
[Major features]
- Reproduce the M48 bridge tank created by the US Army in the 1950's
- Development of upper body parts and bridge parts with new parts (New mold)
- Parts of the bridge firmly reproduce details of the side bolt and tread surface in addition to its frame structure
- Scissor type bridge mechanism also modeled in detail to hydraulic cylinders, lines and cables
- Two cupola for commander and operator and bridge seat on engine deck etc. are modeled accurately (new mold)
- The texture of the casting skin is expressed and the weight feeling is sufficient
- Caterpillar adopt integral DS track
- Size at completion: Total length of about 265 mm
- Added new money type
[About actual vehicle]
- Tanks were one of the weaknesses that prevented the mobility of the grooves, trenches and rivers that exceeded the length of the track since its appearance.
- Engineers installed bridges to deal with them, but as more mobility was required, it was a cross battle tank that was developed.
- Utilizing the bodies of the tanks, on top of which they are replaced with weapons such as turrets and equipped with bridge parts.
- We set up a bridge by advancing to the front line and rapidly installing a bridge that can also pass tanks and secured a course.
- One of the bridge tank M48AVLB developed by the United States in the 1950s.
- Appeared in 1952, loaded with a bridge folded in half folded on the basis of the body of the M48 series that gathered the soldier's trust with success in the Vietnam War etc.
- We adopted a scissor-type mechanism to pass to the other side while spreading the bridge by hydraulic piston after arriving at the site.
- The stretched bridge had a length of 19.2 m and a width of 4 m and had the ability to withstand a weight load of 60 tons.
- Vehicles remodeled based on the M48A2 type were the center, but vehicles based on the M48A5 type were also made and deployed and operated not only in the US army but also in NATO and others.
[About the model]
- The model is a plastic model assembly kit that reproduced the M48AVLB on 1/35 scale, a cross-battle tank remodeled based on M48 patton after the war.
- Each type has already been launched from the dragon and based on the M48 kit which is highly evaluated for its finish, the upper part of the car body and the bridge parts are developed with new parts and combined.
- In addition to its frame structure, bridge parts also reproduce the details of the side bolt and tread surface firmly.
- In addition, the mechanism of the scissor type bridge is modeled in detail to the hydraulic cylinders, lines and cables.
- Because it can be assembled at arbitrary position between the storage state and the expansion state, as well as it corresponds, it corresponds also to a wide scene setting etc etc.
- The car body equipped with this bridge mechanism newly developed the upper part of the car body.
- In the part where the turret has been removed, the two cupola for Commander and operator and the bridge seat on the engine deck are modeled accurately, and it is a mechanical finish.
- The lower part of the car body is integrally molded using a slide mold.
- The texture of the casting skin is expressed and the weight feeling is also sufficient.
- Military fans can not miss models full of presence with bridges.
- The 30th anniversary celebrates the increasingly mature dragon.
[Major features]
- Reproduce the M48 bridge tank created by the US Army in the 1950's
- Development of upper body parts and bridge parts with new parts (New mold)
- Parts of the bridge firmly reproduce details of the side bolt and tread surface in addition to its frame structure
- Scissor type bridge mechanism also modeled in detail to hydraulic cylinders, lines and cables
- Two cupola for commander and operator and bridge seat on engine deck etc. are modeled accurately (new mold)
- The texture of the casting skin is expressed and the weight feeling is sufficient
- Caterpillar adopt integral DS track
- Size at completion: Total length of about 265 mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 53 x 33 x 10 cm / 1309g
DRAGON 1/35 3606 M48 AVLB Armored Vehicle Launched Bridge Plastic Model Kit
- Reproduce bridging tanks of the American military overflowing presence with a bridge!
- Added new money type
[About actual vehicle]
- Tanks were one of the weaknesses that prevented the mobility of the grooves, trenches and rivers that exceeded the length of the track since its appearance.
- Engineers installed bridges to deal with them, but as more mobility was required, it was a cross battle tank that was developed.
- Utilizing the bodies of the tanks, on top of which they are replaced with weapons such as turrets and equipped with bridge parts.
- We set up a bridge by advancing to the front line and rapidly installing a bridge that can also pass tanks and secured a course.
- One of the bridge tank M48AVLB developed by the United States in the 1950s.
- Appeared in 1952, loaded with a bridge folded in half folded on the basis of the body of the M48 series that gathered the soldier's trust with success in the Vietnam War etc.
- We adopted a scissor-type mechanism to pass to the other side while spreading the bridge by hydraulic piston after arriving at the site.
- The stretched bridge had a length of 19.2 m and a width of 4 m and had the ability to withstand a weight load of 60 tons.
- Vehicles remodeled based on the M48A2 type were the center, but vehicles based on the M48A5 type were also made and deployed and operated not only in the US army but also in NATO and others.
[About the model]
- The model is a plastic model assembly kit that reproduced the M48AVLB on 1/35 scale, a cross-battle tank remodeled based on M48 patton after the war.
- Each type has already been launched from the dragon and based on the M48 kit which is highly evaluated for its finish, the upper part of the car body and the bridge parts are developed with new parts and combined.
- In addition to its frame structure, bridge parts also reproduce the details of the side bolt and tread surface firmly.
- In addition, the mechanism of the scissor type bridge is modeled in detail to the hydraulic cylinders, lines and cables.
- Because it can be assembled at arbitrary position between the storage state and the expansion state, as well as it corresponds, it corresponds also to a wide scene setting etc etc.
- The car body equipped with this bridge mechanism newly developed the upper part of the car body.
- In the part where the turret has been removed, the two cupola for Commander and operator and the bridge seat on the engine deck are modeled accurately, and it is a mechanical finish.
- The lower part of the car body is integrally molded using a slide mold.
- The texture of the casting skin is expressed and the weight feeling is also sufficient.
- Military fans can not miss models full of presence with bridges.
- The 30th anniversary celebrates the increasingly mature dragon.
[Major features]
- Reproduce the M48 bridge tank created by the US Army in the 1950's
- Development of upper body parts and bridge parts with new parts (New mold)
- Parts of the bridge firmly reproduce details of the side bolt and tread surface in addition to its frame structure
- Scissor type bridge mechanism also modeled in detail to hydraulic cylinders, lines and cables
- Two cupola for commander and operator and bridge seat on engine deck etc. are modeled accurately (new mold)
- The texture of the casting skin is expressed and the weight feeling is sufficient
- Caterpillar adopt integral DS track
- Size at completion: Total length of about 265 mm
- Added new money type
[About actual vehicle]
- Tanks were one of the weaknesses that prevented the mobility of the grooves, trenches and rivers that exceeded the length of the track since its appearance.
- Engineers installed bridges to deal with them, but as more mobility was required, it was a cross battle tank that was developed.
- Utilizing the bodies of the tanks, on top of which they are replaced with weapons such as turrets and equipped with bridge parts.
- We set up a bridge by advancing to the front line and rapidly installing a bridge that can also pass tanks and secured a course.
- One of the bridge tank M48AVLB developed by the United States in the 1950s.
- Appeared in 1952, loaded with a bridge folded in half folded on the basis of the body of the M48 series that gathered the soldier's trust with success in the Vietnam War etc.
- We adopted a scissor-type mechanism to pass to the other side while spreading the bridge by hydraulic piston after arriving at the site.
- The stretched bridge had a length of 19.2 m and a width of 4 m and had the ability to withstand a weight load of 60 tons.
- Vehicles remodeled based on the M48A2 type were the center, but vehicles based on the M48A5 type were also made and deployed and operated not only in the US army but also in NATO and others.
[About the model]
- The model is a plastic model assembly kit that reproduced the M48AVLB on 1/35 scale, a cross-battle tank remodeled based on M48 patton after the war.
- Each type has already been launched from the dragon and based on the M48 kit which is highly evaluated for its finish, the upper part of the car body and the bridge parts are developed with new parts and combined.
- In addition to its frame structure, bridge parts also reproduce the details of the side bolt and tread surface firmly.
- In addition, the mechanism of the scissor type bridge is modeled in detail to the hydraulic cylinders, lines and cables.
- Because it can be assembled at arbitrary position between the storage state and the expansion state, as well as it corresponds, it corresponds also to a wide scene setting etc etc.
- The car body equipped with this bridge mechanism newly developed the upper part of the car body.
- In the part where the turret has been removed, the two cupola for Commander and operator and the bridge seat on the engine deck are modeled accurately, and it is a mechanical finish.
- The lower part of the car body is integrally molded using a slide mold.
- The texture of the casting skin is expressed and the weight feeling is also sufficient.
- Military fans can not miss models full of presence with bridges.
- The 30th anniversary celebrates the increasingly mature dragon.
[Major features]
- Reproduce the M48 bridge tank created by the US Army in the 1950's
- Development of upper body parts and bridge parts with new parts (New mold)
- Parts of the bridge firmly reproduce details of the side bolt and tread surface in addition to its frame structure
- Scissor type bridge mechanism also modeled in detail to hydraulic cylinders, lines and cables
- Two cupola for commander and operator and bridge seat on engine deck etc. are modeled accurately (new mold)
- The texture of the casting skin is expressed and the weight feeling is sufficient
- Caterpillar adopt integral DS track
- Size at completion: Total length of about 265 mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 53 x 33 x 10 cm / 1309g
On Oct 10, 2023 at 20:24:43 PDT, seller added the following information: