EVGA nForce 790i ULTRA SLI 132-CK-NF79-A1 + Intel Core 2 Extreme QX9650 SLAWN C1 Stepping as in the photo Serial L808A967 + Corsair Dominator DDR3 16Gb CMT8GX3M2A2000C9 ver5.11 Serial number 110803529 4pcs 4Gb + Thermalright Ultra-120 eXtreme LGA775
Any questions in a personal message.
This is the only very rare memory model with the same serial numbers, which works with 16Gb of memory with the EVGA nForce 790i ULTRA SLI 132-CK-NF79-A1, since it is documented to be 8Gb, but this memory runs fine at 16Gb.
mikegallop
Tuesday, April 26, 2011 11:24 PM
https://forums.evga.com/Using-4GB-RAM-modules-on-a-790i-series-board-m837038-p2.aspx
----
Well, I decided to see what happens, I bought 2 of the 8GB Dominator GT DDR 3 2000 kits ( CMT8GX3M2A2000C9 )
I will get 8 stable in one machine, then see if I can get to 16, or have to stop at 10 or 12...
Running a 790i Board with a 9770. I intend to run the CPU at 3.6, instead of the stock 3.2
Will report the results!
-----
https://forums.evga.com/Ram-upgrade-on-790i-Ultra-SLI-m1127385.aspx
Friday, July 22, 2011 8:50 PM
From that other thread - I am running this:
2 of the 8GB Dominator GT DDR 3 2000 kits ( CMT8GX3M2A2000C9 )
On a 790i @ 1600 Mhz with a 9770 CPU just fine. I can dig up the post with the specs that I'm running at, but I've had them in there quite a while without a problem. 16 GB is nice!
And here are the details that are working for me:
BIOS Version: P10
**System **
CPU Freq, MHz: 3600 GHZ
FSB Reference Clock, MHz: 1600
CPU Multiplier: [9X]
PCle x16-1 & 16-2, MHz: [100]
PCle x16-3, MHz: [100]
SPPc->MCP Ref Clock, MHz: [200]
nForce SPP --> nForce MCP: [5X]
nForce SPP c-- nForce MCP: [5X]
**Spread Spectrum**
CPU Spread Spectrum: [Disabled]
HT Spread Spectrum: [Auto]
PCle Spread Spectrurn(SPP): [Disabled]
PCle Spread Spectrurn(MCP): [Auto]
SATA Spread Spectrum: [Disabled]
**FSB & Memorv Config**
FSB - Memory Clock Mode: [Linked]
FSB - Memory Ratio: Sync
FSB (QDR), MHz: [1600]
Actual FSB (QDR), MHz: 1600
x MEM (DDR), MHz: Linked
Actual MEM (DDR), MHz: 1600
P1: [AUTO]
P2: [AUTO]
**Memory Timing Setting**
Memory Timing Setting: [manual]
tCL (CAS Latency): 8
tRCD: 9
tRP: 8
tRAS: 27
Command Per Clock: [2T]
** Advanced Memory Settings **
tRRD: [1]
tRC: [26]
tWR: [10]
tWTR: [19]
tFAW: [20]
tREF: [Auto] 7.7
tRFC: 90
**System Voltages**
CPU Core: [1.3875]
CPU FSB: [1.2]
Memory: [1.65]
nForce SPP: [1.45]
nForce MCP: [1.55]
GTLVREF Lane 0: [-35]
GTLVREF Lane 1: [-35]
GTLVREF Lane 2: [-35]
GTLVREF Lane 3: [-35]
**CPU Configuration**