LORD 7545 Urethane Adhesive System - Thick Viscosity, Non-Sag with Configurable Set-Time & high strength for FRP, SMC, Plastics, primed metals, powder coating

/Parker LORD® 7545A-B Urethane Adhesive is a two component, nonseg gel/paste (non-flowable thick) adhesive system that is used for bonding primed metals, SMC, FRP, and plastics. It is environmentally friendly, high strength, non-flammable, non-sagging, and resistant to weathering, chemicals, sunlight, and humidity. 7545 adhesive system is configurable to a variety of different set times to fit your need, simply select the hardner with the set time you need. Features and Benefits Non-Flammable – does not require explosion-proof equipment. Thick Viscosity, Non-Flowable, Non-Sag Thick Gel so it stays in place and doesn't run or drip. Configurable set times (working life), simply pick the hardener with the desired set time. Environmentally Resistant – resists sunlight, weathering, humidity and salt spray. Chemically Resistant – solvent resistant when cured. Painting and most cleaning processes do not affect bond strength. 7545-A Resin 7545-B Hardener 7545-C Hardener 75452-D Hardener 7545-E Hardener 7545-F Hardener 7545-G Hardener Color: Brown Off-White or Black Off-White Off-White or Black Off-White Off-White Black Viscosity, cP @ 77°F (25°C) Med: 25,000-70,000 Thick Gel: 230,000-650,000 Thick Gel: 230,000-650,000 Thick Gel: 230,000-650,000 Thick Gel: 230,000-650,000 Thick Gel: 230,000-650,000 Thick Gel: 230,000-650,000 Working Life (Set Time) 3-5 Min 6-8 Min 10-20 Min 22-40 Min 45-65 Min 1-2 Min Handling Strength 30 Min 60 Min 90 Min 2-3 Hours 4 Hours 10 Min Cartridge Part Numbers 7545A/B (Brown) 7545A/B (Black) 7545A/C 7545A/D 7545A/E 7545A/F 7545A/G 50ml Cartridge 3003923 3026832 3003924 3003927 3008743 200ml Cartridge 3003922 3023630 3003915 3003925 3003917 400ml Cartridge 3018244 600ml Cartridge 3023817 3003916 Black 3024008 3003930 Bulk Pail Part Numbers 7545-A Resin (Brown) 7545-B Hardener (Black) 7545-B Hardener (Off White) 7545-C Hardener 7545-D Hardener 7545-E Hardener 7545-F Hardener 7545-G Hardener 1-Pint 5-Gallon 3003921 3024876 3003931 3003935 3024875 3024874 55-Gallon 3003918 3017703 3003936 3018622 Typical Use: LORD® 7545 adhesive bonds FRP, SMC, and other plastics with little surface preparation where bond strengths greater than the substrate are desired. This adhesive also bonds primed metals and various combinations of dissimilar substrates. Color: Black Components: 2 part Cure System: Room Temperature Cure Time: 24h @ 24 °C Flash Point: >93 °C Mix Ratio: 1:1 by volume; 1:0.87 by weight Viscosity: Part A: 25,000 to 70,000; Part B: 230,000 to 650,000 Working Time: 3 to 5min @ 24 °C