This flared magwell for the Adventure Force Aeon Pro or Nexus Pro allows magazines to be inserted quicker and easier (do it without even looking!). It attaches to the short dart magazine adapter included with the blaster and is compatible with both the original Adventure Force / Dart Zone magazines as well as Worker magazines. This magwell also removes the slop/play that is present with the short dart magazine adapter in most cases (may vary based on main magazine release used). No drilling or permanent modifications are required!

I also have a version available for the Dart Zone Max Stryker in my shop.

Includes: 1x Flared Magwell for Adventure Force Aeon Pro / Nexus Pro.

Attribution: Designed by Transmogrification Labs.

Installation: Slide the flared magwell onto the short dart magazine adapter horizontally. It will snap into place and be ready to use.
Depending on the main magazine release you're using and which blaster (Nexus versus Aeon), there may be a slight gap towards the front of the magwell where it meets the body. This is because some replacement magazine releases affect the distance to the body and the Aeon has a shorter distance to the body. This ensures maximum compatibility and so you can interchange the adapter between the two. If you have trouble with it not locking into place, feel free to reach out to me and let me know what main mag release you're using that is causing the issue and I'll see if I can help. This magwell should work with all magazine releases though as I have tested it with several different ones.

Notes about material: This product is printed in PETG material which offers superior thermal resistance and increased durability compared to PLA products. PETG has a higher glass transition temperature of 80°C whereas PLA is 60-65°C. For PLA, this is within range of the temperatures that often occur inside a vehicle during summertime so items made from PLA may end up warping in those situations. The same issue can possibly occur from exposure to direct sunlight if the temperature is high enough. PETG has a much higher glass transition temperature however so you are very unlikely to ever experience issues with it warping in addition to it just being stronger in general. PETG products do come at a higher cost than the same product in PLA because PETG takes longer to print and also requires more time to clean up after printing but the result is a very high-quality product.

Disclaimer: All of my products are printed and tested with the utmost attention to detail. Despite this, I am NOT responsible for any damage incurred to you or your blasters through the use of any of these parts alone or a combination with others. It is up to you to keep yourself and your blasters in functioning condition. Some prints may have visual imperfections as is common to all 3D printing (especially for PETG). These slight imperfections will not interfere with mechanical function or integrity/strength.


Powered by ExportYourStore.com