Pump Power
|
40W
|
Voltage
|
AC 220V 50HZ, China Plug
|
Flow rate
|
3500LPH
|
Head-max
|
3M
|
Pump Size
|
14.5*8*12cm
|
LED power
|
2.8W
|
LED Size
|
6.8*6.8*3cm
|
Lamp beads
|
30pcs
|
Sprinklers head style
|
Mushroom type/ Fancy type
|
Pump line length
|
4.8m
|
LED line length
|
4.8m
|
Pump rod
|
50cm
|
Sucker
|
4pieces
|
|
Always disconnect from the electrical socket before handing or maintenance. |
Do not lift the pump unit with the wire( power code) and do not operate out of the water. |
|
A clogged or dirty intake screen will generally reduce the performance of the pump. |
Occasional cleaning is required to maintain the performance of your pump. |
If less flow is required, adjust the flow control lever. |
|
Remove the front cover and impeller cover. |
Carefully remove the impeller unit and clean the cylinder with a small brush or under running water. |
|
Slimmer design combing high performance output with quiet operate. |
Has a durable ceramic shaft to suit both marine and freshwater aquariums. |
The pump is fully sealed with a plastic injection cover for added safety. |
Ideal for pond or waterfall setups. |
Bright ,interchanging LED lights adds a magical touch to your décor. |
|
DO NOT connect to any voltage other than that shown on the pump. |
DO NOT pump flammable liquids. |
DO NOT use with water above 35℃. |
If the pump fails to operate , make sure that the power socket is properly connected. |
It is advisable that the power socket of the pump is at a higher level to ensure that water does not back flow via the wire to the socket outlet. |
|