I.Introduction:   
Because of the influence of coil wire material, magnetic material, framework and process craft etc., coil product (such as transformer, motor…etc.) can generate debasement of the insulation performance of the coil layer, circle and down-lead. TH2882A-3 impulse winding tester, adopting high-speed sampling technique to develop, is a new analysis test instrument for insulation performance of coil product. Memorizing sampling waveform of standard coil winding in the instrument inside, when testing, TH2882A-3 compares standard waveform and tested waveform according to criterion of settings (Area, Differential Area, Corona Discharge, Differential Phase etc. ), then judges if the coil winding is good or bad. This instrument gathers mighty function, precision testing method, flexible operation method and various interfaces to offer test solution for most coil winding manufactories. The product saves sampling waveform of standard winding in instrument, and compares measured waveform with standard one at the time of measurement. The measured winding will be judged according to set criterion (area, area difference, phase difference, corona). TH2882A-3 is mainly used to measure three-phase 3-wire or three-phase 4-wire motor with three windings. Measured waveform is compared with standard one in instrument, or different waveforms in different windings are compared without standard waveform.   
|
II.Feature:
■ Low inductance impulse test: down to 10μH. |
■ Low energy test without damaging the coil. |
■ Fast detection of winding insulation at a speed of 5.5. |
meas/sec. |
■ 4 kinds of waveform comparison methods. |
■ Up to 40 MSPS sampling rate. |
■ 320×240 dot-matrix graphic LCD display. |
■ Chinese and English operation languages. |
■ Fridndly user's interface and easy operation. |
■ Multi-trigger mode programmable. |
■ Voltage, Time and Frequency measuring function. |
■ Direct display of comparison result. |
■ Keyboard lock and password protection function. |
■ Handler, RS-232C, and GPIB(optional) interfaces. |
■ 500 groups of waveforms can be stored in USB disk. |
(optional). |
■ Multi-channel scan control interface: SCANNER (optional). |
|
Product Model: | TH2882A-3 | Impulse winding tester | Test function | Test object | Impulse energy | Winding inductance range | Waveform sampling | | Sampling rate | Resolution rate | Sampling length |
|
| Input impedance | Display waveform test | Test repeat accuracy | Trigger mode | Average time | Displayer | Displayed information |
|
| Single phase winding | ≤0.09 Joule | ≥ 10μH | 40 MSPS, 20 MSPS, 10 MSPS, 5 MSPS, 2.5MSPS,1.25 MSPS, 625 kSPS, 312 kSPS, 156 kSPS | 8 digits | 960 byte | 10 MΩ (Resistance divider) | Voltage,time,frequency | ±1% | Internal/manual(foot control/external/Bus | 1—99 | 320×240 LCD, 240×200 waveform display | Set parameter, standard and waveform, measurement and compare result |
| Test signal | Impulse peak voltage | Impulse voltage accuracy | Voltage control mode |
|
| 300V-3000V programmable,step 50V | ±5% set value±5V | Nor:set the open voltage programmably Cons:voltage auto control,not affect by widning impedance |
| Comparator | Control mode | Judge output | Alarm volume |
|
| Space,space deviation,corona and phase deviaiton | PASS/FAIL display,alarm | Long high,long low, single short,double short,off |
| | 60 groups of standard waveform 800 groups of waveform can be stored in USB device |
| Operation temperature and humidity | 0℃-40℃, ≤ 90%RH | | 198V-242V AC, 99V-121V AC | 47.5Hz-63Hz |
| |
|
Weight | Approx.7.5 kg |
|