|
220V 400HZ 8A 2.2kw Water-cooled Spindle motor and 1.5kw inverter VFD.
|
|
Parameter of 2.2KW Water-cooled Spindle motor:
|
|
Spec: 80mm x 240mm (Dia. x L) (3.15" x 9.45").
Power: 2.2 KW.
Voltage: 220V.
Frequency: 400 Hz.
Current: 8A.
Speed: 0-24000 rpm.
Water-Cooling.
Collet chuck: 3-13 mm ER20 / 6mm.
Can be used for 2cm wood board.
|
|
Paramer of 2.2kw inverter:
|
| Items |
Criterion |
| Performance |
Rated output power(KW) |
2.2 |
| Rated output Current(A) |
10 |
| Motor Power (KW) |
2.2 |
| Frequency range |
0~600Hz |
| Precision of output frequency |
0.01Hz |
| Distinguish rate of setting frequency |
Digital setting: 0.01Hz. Analog setting: AD switch precision for one in thousand,linearity for +-5%. |
| Speed range |
1:100 |
| Overload capability |
150%rated current 60s;180%rated current 2s.? |
| Control Mode |
Open-loop simple vector control |
| Torque boost |
Manual torque can be adjust; Auto-Torque upgrade the whole frequency band. |
| Start up Torque |
when0.5Hz, rated torque for 150%. |
| Function descriptions |
Acc and Dec time |
0.1~3200.0s |
| Jog function |
Jog frequency:0.00~50.00hz; |
| Standard functions |
Simple? vector? control, torque? boost, automatic? slip compensation(rev gain),stop for DC braking,Restart after power off instantaneous,auto fault reset,control over-current when accelerating speed,multi-step speed 4 run,traverse frequency function applies to textile,closed loop PID control |
| Run rule |
3 kinds? control? mode???keyboard? control,? analog? terminal control, serial communication control |
| Frequency Source Selection |
Digital setting, analog voltage setting, analog current setting, the serial communication port setting; can be combined through a variety of ways to switch. |
| Input Terminals |
4digital? input? terminals,? as? many? as? 13? kinds? of? custom features, is compatible with the active NPN input; Two analog input terminals, can receive a voltage signal (0 ~10V), or current signal (4 ~ 20mA); |
| Output Terminals |
1 relay output, up to? 6 kinds of user defined functions;11 open-collector output,6 user defined functions;1 analog output, 4 kinds of user defined functions; can export voltage signal (0 ~ 10V). |
| Protection functions |
Overvoltage,undervoltage and external fault,overcurrent,overheating,overload |
| Environment |
Installation place |
Indoor, Altitude of less than 1 km, clean, non-corrosive gases and no direct sunlight |
| Temperature |
-10°C ~ +40°C(Inverter?? will?? be?? derated?? if?? ambient temperature exceeds 40°C.) |
| Humidity |
20%~90%RH(without dewfall) |
| Vibration |
Less than 0.5g |
| Storage Temperature |
-25°C~+65°C |
|
| A (mm) |
W (mm) |
B (mm) |
H (mm) |
D (mm) |
Installation Hole (mm) |
| 75 |
86 |
131 |
142 |
121 |
φ4.5 |
|
