This HDBaseT single network cable extender transmits HDMI signal up to 70meters over cat6 fluently and clearly. It is lossless in signal and supports 3D, 24bits deep color, 4K*2K, CEC and HDCP.
|
Bi-directional IR pass back.
|
| It supports bi-directional IR pass back. User can control DVD at TX end and control TV at RX end. |
| If control at RX end, please connect IR blaster extension cable with IR OUT of TX and connect IR receiver extension cable with IR IN of RX. If control at TX end, please connect IR receiver extension cable with IR IN of TX and connect IR blaster extension cable with IR OUT of RX. |
|
|
Features:
| Apply HDBaseT extend technology. |
| Uncompressed HDMI video signal. |
| Support bi-directional IR pass back. |
| Support uncompressed audio output (such as LPCM). |
| Support uncompressed LPCM audio ans compressed DTS-HD, Dolby True HD. |
| Can be powered by network cable. It only needs to input 12V power for either transmitter or receiver for normal working. |
|
| Items | Specifications |
| HDMI signal | 4K*2K, compatible with HDCP; support CEC and 24 bits deep color |
| Network cable | UTP/STP Cat5e/6/6A/7 |
| Support resolution | 480i/p 576i/p 720p 1080i/p 3D 4K*2K |
| Infrared back | Support 20~60kHz wide frequency devices and Bi-directional IR transmission |
| Power supply | DC12V2A |
| Power consumption | <8W |
| Production dimension | 98.5(W)*66.5(D)*23(H)mm | |
|
Important Safety Instructions:
|
| Shut off power and make sure environment is safe before installation. |
| Do not plug-in/out the connected cables when it is in using. |
| Make sure specification matched if using adapters not supplied by factory. |
|
|
Package contents:
| HDMI to HDBaseT sender *1pcs. |
| HDBaseT to HDMI receiver *1pcs. |
| IR blaster extension cable *1pcs. |
| IR receiver extension cable *1pcs. |
| User manual. |
| Power adapter: DC 12V/2A *1pcs. |
|