| 200 MHz, 100 MHz, 70 MHz and 50 MHz bandwidth. |
| 2 channel model and 4 channel model. |
| Channel 2 gs/s sampling rate. |
| Record length 2.5 k points on the aisles. |
| Senior triggers, including pulse-width trigger line and choose video trigger. |
| Easy to use features. |
| 16 kinds of automatic measurement and analysis of FFT, simplify the waveform analysis/li >. |
| Built-in waveform limit test/li >. |
| Automatic extension data record function/li >. |
| Automatically set and the signal automatic range/li >. |
| Built-in contextual help/li >. |
| Probe check guide/li >. |
| Multilingual user interface/li >. |
| 5.7 inches (144 mm) active TFT color display/li >. |
| Small volume, light weight, only 4.9 inches (124 mm) deep, only 4.4 pounds (2 kg). |
|
| Display (QVGA LCD) |
TFT |
|
Bandwidth * 3 |
200 MHz |
|
channel number |
4 |
Sampling rate in
each channel |
2.0 GS/s |
|
Record length |
2.5k K |
|
Vertical resolution |
8 bits |
|
Vertical sensitivity |
After the calibration fine-tuning,
2 mV - 5 V/div |
|
DC accuracy of vertical |
± 3% |
|
Vertical scaling |
Vertical expansion or compression waveform
real-time waveform or stop |
|
Maximum input |
300VRMSCAT II; 在超过100 kHz When rating to 20
dB/10 Hz Fall, 3 MHz As for the13Vpk-pkAC |
|
Position scope |
2 mV - 200 mV/div +2 V |
|
|
|
>200 mV - 5 V/div +50 V |
|
Bandwidth limitations |
20 MHz |
|
input coupling |
AC, DC, GND |
|
input impedance |
1 MΩ In parallel 20pF |
|
Time base scope |
5ns - 50s/div |
|
Accuracy of time base |
50 ppm |
|
The level of zoom |
Horizontal scaling or folding activities
of waveform or stop the waveform |
Isolation outside
the trigger input |
Yes |
|
Benchmark waveform display |
2 point 2.5 k benchmark waveform |
Do not use the U disk in
waveform storage |
5ns-50s/div |
|
PU connection |
Including 2.0 usb ports |
The front panel USB host port support
USB flash drive |
Instrument support USB ports connected to
the PC compatible
pictBridge behind all the printer |
|
GPIB option (using the adapter) |
|