GEPRC Happy to announce a new member of our family " TinyGO"  Ready To Fly Kit which is suitable for any novice from scratch and Indoor flight. Through a great number of tests, Better technical indexes and Good performance were obtained.TinyGO currently has two versions: the Indoor version and the 4K professional version. 4K can record 4K 60fps video.

TinyGO is RTF Kit for Indoor Flight. The Kit contains a high-definition 800x480px FPV Goggle and the latest GEPRC GR8 Remote Controller. It supports 8 channels and is specially designed for indoor and novices. The remote control has a good feeling of control and It is lightweight and easy to carry. The good point is that you don't need to carry heavy equipment. With our customized GEPRC Fly Bag, it's very convenient to go to the field, travel, and Indoor flight.

TinyGO can use its own charger to charge. The charger uses the Type-C interface. You can use the movable power bank to charge as well. Using conveniently and quickly.

TinyGO can be flight more than 6 minutes (Depending on flight habits). Its stable electronic equipment and extremely strong and tough frame material make the FPV very stable and durable for crash. There is an EVA protection foam around the frame, More elastic and hard to damaged and deformed.

TinyGO is carefully assembled and assembles by GEPRC team, with excellent performance. You can start a whole new journey and enter into FPV World, TinyGO will be the best choice for your first FPV Drone.

This looked like the beginning of a terrific flight Experience Literally

Feature:

• TinyGO is very suitable for indoor flight, More than 6 minutes of flight time

• Using GEPRC-12A-F4 FC system, reliable and stable

• No Propellers in view, Anti-jamming VTX, NO Jello flight Footage, stable flight picture

• The Newly Developed GR8 Remote Controller is specially designed for Novice and indoor flight

• High-Quality FPV Goggle, High definition 800 * 480px, sensitive 5.8G receiver

• Ready To Fly Kit, Including a GEPRC Fashion Fly bag, Portable and Light weight.

• There are Two versions: The normal version is suitable for daily practice, The 4K version can Record 4K 60fps Video.

Configuration:

• Name: TinyGO

• Brand: GEPRC

• Frame: GEP-TG16

• Motor to Motor: 79mm

• FC: GEP-12A-F4

• MCU: STM32F411

• IMU: MPU6000(SPI)

• OSD: BetaFlight OSD w/ AT7456E chip

• ESC: BLheli_S 12A

• VTX: 5.8G 25~200mW VTX

• Camera: Caddx Loris 4K 60fps

• Propeller: GEMFAN 1636*4 (4 pairs)

• Motors: GR1102 10000Kv

• TinyGO 4K Weight: 54.8 Grams

Remote Controller:

• GEPRC GR8 Remote Controller

• Radio Frequency: 2.4GHz

• Radio Protocol: FHSS

• Channel: 8

• Transmit Power: < 20 dBm

• Antenna: In-built dual Antenna

• Low Voltage alarm: <4.8v

• Batteries: 4 x AA Batteries

Receiver:

• Channel: 8

• Voltage: 5V

• Radio Frequency: 2.4GHz

• Radio Protocol: FHSS

• Range: 300 meter

FPV Goggle:

• Resolution: 800*480px

• Size of Screen: 4.3 inch

• Whole Size: 155mmx144mmx113mm

• In-built batteries: 3.7v/2000mAh

• Working Hours: 2.5 Hours

• Weight: 314.6 Grams

FPV Batteries:

• Batteries Capacity: 530mAh

• Voltage: 4.35v 1S1P

• Discharge rate: 90C

• Size:(61mmx16.7mmx7mm)

• Weight: 12.7 Grams

• Interface: PH2.0

Charger:

• Input power: 5v (USB & Type C)

• Full charged Voltage: 4.35v

• Output current: 500mAh

• Charging: It can charge 4 PCS 1s HV lipo 4.35v HP2.0 plug batteries at the same time

Include:

• 1x TinyGO TinyWhoop

• 1x GEPRC GR8 Transmitter(left throttle mode 2, right throttle mode 1)

• 1x GEPRC FPV RG1 Goggle

• 1x GEPRC 1S LiHV 4.35v Charger

• 4x GEPRC LiHV 4.35v 80C Battery

• 1x Battery strap

• 4x Gemfan 1636*4 Props(pairs)

• 1x GEPRC Fly bag

• 1x Screwdriver