JMT J135mm 3inch 135mm Frame DIY Drone Kit F405 DM Mini Flight Controller 1306 3100KV Motor 3052 Props 1200TVL FPV Camera
Functions and Features:
Built-in OSD Betaflight
Support BLHeliSuit configuration
Support voltage 2-3S"
Paddle
Product Name: 3052
Weight: 1.65g
Material: PC
Inner diameter: 5mm
Hub thickness: 6mm blade
Width: 11.1mm paddle
Size: 11mm"
ESC
Current: 20A
Maximum current: 30A
BEC: No
Battery: 2-4S
Weight: 4.8 grams
Size: 27x31mm (PCB)
Mounting hole: 20x20mm
Support D-shot 150, D-shot 300, Oneshot 125 and Multishot
VTX
Input voltage: 6-26V
Output voltage: 5V
Frequency: 5.8G
Frequency point: 16 points
Output power: 6-speed adjustable (0mW / 25mW / 50mW / 100mW / 200mW / 400mW)
Size: 24 * 24 * 3mm
Installation hole distance: 20 * 20mm
Weight: 2.2g
Motor
Size: 1306
KV: 3100
Stator diameter: 18mm
Stator length: 14.1mm
Shaft diameter: M4
Size: (diameter * length): Φ18×15.1mm
Motor weight (g): 13g
Power (lithium battery): 2-3S
Recommended ESC: OPTO mini 12A / 16A / 20A
Maximum current (A): 7.6A
Maximum power (Watts): 61W
Flight control
Size: 31 * 30 * 8mm
Installation hole distance: 20 * 20MM, φ4mm
Weight: 6g
Package weight: 20g
Processor: stm32f722ret6
Gyroscope: mpu6000
B EC: 5V / 3A; 9V / 2.5A
Firmware: betaflight_ 4.1.0_ MATEK722"
Camera
Image sensor: 1/3" COMS
Horizontal resolution: 1200TVL
Lens: 2.1 mm
Signal system: PAL / NTSC
Signal to noise ratio:> 60dB (AGC off)
Electronic shutter speed: PAL: 1/50~100,000; NTSC: 1/60~100,000
Net weight: 5.0 grams
Voltage: 5-40V
Dimensions: 19mm*19mm*19mm
Note:
1 Do not charge the battery when you are away from home, do not charge the battery immediately after flying, and do not over-discharge the battery (over-discharge may cause the battery to fail to charge and become invalid). The battery cannot be powered off immediately after it is fully charged. Charge for a long time.
2. Do not modify any parameters and wiring without knowing the flight control and remote control.
3. Turn on the remote control before powering on the airplane, unplug the power switch after the flight, and then turn off the remote control to prevent accidents.
4. The product is unassembled/welded in loose parts. If you have any technical and assembly problems, please feel free to contact us. We have a dedicated technical team to answer related questions. If customers need to assemble, please feel free to contact us, we will give a reasonable quotation for additional logistics freight and technical assembly fees.
5. This product is not a toy and is not suitable for children under 14 years of age.
6. If you are a beginner, it is recommended to be assisted by an experienced adult
7. Novices should pay attention not to take the airplane by hand or let children take it to prevent it from being scratched.
8. Please turn off the start switch in time when the airplane falls from a wall or hits other objects during flight, otherwise it may cause damage to the flight control motor, etc. Check whether the airplane is damaged or the screws are loose.
Q&A
Please refer to our pictures to select the desired combination. All parts are sold separately in our shop, and you can add them as spare parts. If you have any questions, please feel free to contact us.
Notice: the Goggles has have orange color, if you need change the color, pls leave us a message
BNF With Flysky i6 Remote Controller:
RTF Version
RTF FPV Version:
BNF With Battery Charger Version:
