HMV Gramophone Manual Brake and Governor Leather Pads
This Kit Includes: THREE 1" long pieces of approximately 4 mm x 4 mm Leather Brake Pad Material.
(A 1" section is enough leather for at least three brakes or governor friction plate pads)
Also suitable for other gramophones by trimming/shaping as necessary with a sharp Stanley/Craft knife
This
leather can be used for brake pads and governor friction plate pads on
HMV gramophones. The leather that HMV and other companies used was cut from the thickest section of
the hide and is similar to that being sold here.
Installation Hints: In most early gramophones the leather pads are held captive in a fork-like fitting that grips
around the leather. Removing the old pad is simply a matter of carefully
tearing/cutting away the old remnants. Installing the new pad requires
great care because the forked opening must be slightly spread open in
order to receive the new leather. Once in place, the fork is then very
gently clamped tight using a pair of pliers or a small hobby vice. (If things do go wrong and one of the fork prongs snaps, you can use something like JB KwikWeld, which sets in 6 minutes and cures in 4-6 hours, to securely hold the leather pad in place in the fork).
Recent Feedback
HMV Gramophone Manual Brake and Governor Leather Pads
- Just as described - Thank you.
perfect !
Excellent service. Thank you !
First class professional service - thank you!
Many thanks for great service!!