About this item
- 【Higher Compatibility】Anycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Saturn 3 series or other 10.6 inches and below.
- 【Flexicure Gooseneck Light】Due to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
- 【Better Curing Effect】The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.
- 【Efficient IPA utilization】The dual-layer PP material cleaning basket supports washing with platform and rust-resistant. It is equipped with two adjustable heights of 150 mm and 250mm allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.
- 【Dual-layer Curing】A specially designed double-layer curing platform increases the number of models cured per cycle and markedly improves curing efficiency..
In The Box
Comparison
(Cleaning without platform)
(Cleaning with platform)
228*128*250mm
192*120*235mm
2.Your orders will be shipped out within 1-2 business days after payment received.
Who are we?
Founded in 2015, Anycubic has become one of the most popular 3D printer
brands in the market, with around 300 employees based in China.But, we didn’t start fancy as it seems to look today.
"Graduated in 2015, I came back to China from New Zealand. I was so excited and full of curiosity when landed in Shenzhen the first time”, James , co-founder of Anycubic and a Ph.D of University of Auckland said.
"Lu Ouyang, Anycubic’s Founder and CEO, is my childhood friend. He had a company before Anycubic providing electronic modules and 3D printer accessories for over 4 years.3D printer itself wasn’t our first choice. We hadn’t even had the confidence to rush in.
But after seeing clients increasingly relying on us for key components of their DIY printers, We realized we could do it, and do it much better.”“I didn’t think much but only hope to explore more possibilities with the 3D printing technology. There is nothing to be afraid of. So why not make a difference.” Ouyang added.
In 2015, Anycubic was founded, without much hesitation.
“Following our heart is important. But the real world is harsh. There were so many up and downs. We cannot remember how many sleepless nights out there at the early stage.” Anycubic founders said.
After a whole year’s hard work, the 1st model Anycubic Mega came on board in2016. Fortunately our work paid off. Mega became so popular in the market in a short period of time and our journey as a professional 3D printer maker officially started. We all were amazed and excited but we did not stop there. The second and third generations were launched soon after along the way..
Indeed, 3D printing technologies can do a lot. But first of all we believe 3D printers should be accessible and affordable to all instead of being rocket science and beyond budget. We believe each one of us deserves the freedom to make our ideas, creativity and imagination a reality. Anycubic is committed to being one of the best choices for freedom to make.
3Dream, for freedom to make, Side by side with you, we know we will make it.
For Freedom to Make 3D Printing Education Incubation Project
Inspired by Anycubic' s vision — "For Freedom to Make" — the project is the company' s 3D printing education incubator founded in Shenzhen on September 2, 2020. It demonstrates Anycubic' s aspiration of helping everyone achieve the freedom of creation and invention using 3D printing technologies.
Deemed Anycubic' s first high-tech 3D printing incubator, the project aims to support 3D printing basic research and training, and create a 3D printing education ecological circle to encourage more people to explore the applications of 3D printing in different areas. Support will include 3D printing products, printing services and consultancy, among others.
Incubated partners will hail from various sectors including but not limited to universities, research institutes, and enterprises. This project indicates Anycubic's perseverance in exploring the 3D printing world and boosting the development of innovation in the economy and society.
Addressing the barriers to STEM education will require a collective effort from both institutions and 3D providers, in which we leverage effectively our resources to initiate four 3D printing camps this summer.
The first camp ceremony was held at Yale School of Engineering and Applied Science on April 23 followed by 3 online boot camps known as "ANYCUBIC X Yale Funbotics 3D Modeling and Printing Camp". Guided by Yale mentors, in all boot camps, the students will learn about the inner workings of 3D printers and how to 3D model as well as 3D print their creations.
The Bigger Picture with Education Incubation Project
Promoting 3D printing education and research is a marathon not a sprint. The partnership with Yale Funbotics is Anycubic' s first port of call and the company will continue to work hard to sponsor cooperation with more global universities, research institutes, enterprises, and academic organizations of a global nature and help them achieve success in exploring the world.
Contact us via ebay
2.If you are not satisfied with them, please contact us first via Contact Seller. Your messages will be answered within 18 Hours.
