Supersonic LED Program Card For 45A/60A/80A/120A/150A ESC Brushless Electronic Speed Controller For RC Car
Features:
1.Suit for Supersonic 45/60/80/120A ESC.2.This Programing Card is easy to use.
3.It can program brake force, reverse force, low voltage protection, start mode and neutral range.
Description:
Simple operation, suitable for a variety of esc, is a good choice for RC fans.
Specifications:
Brand name:SURPASSHOBBY
Use: Vehicles & Remote Control Toys
For Vehicle Type: Cars
Remote Control Peripherals/Devices: LED Program Card
Only Apply to: Supersonic Rocket V2 Motor
Material: plastic
1:Low Voltage Cut-Off: The function is mainly to prevent the lithium
battery pack from over discharging. When using lithium battery pack,
please set the suitable value for low-voltage protection as your like.
WARNING: Never use the default value “Non-protection” for lithium
battery! 3.1V Slow、2.9V Slow、2.7V Slow、Disable、3.4V Slow、3.1V
Stop、2.9V Stop、2.7V Stop、3.4V Stop(default value 3.1V Slow).
2:3 start modes (Also called “Punch”) Level3、Level1、Level6、Level2、 Level4、Level5、(default value Level3)
3：Maximum brake force: 50%、25%、75%、100%、Disable(default
value 50%)
4:Maximum reverse force: 25%、50%、75%、100%(default value 25%)
5:Neutral range: 9%(narrow),6%(Normal),12%(Wide) (default value 9%)
6:Motor Overheat Protection：120℃Stop 、135℃ Stop、150℃
Stop、120℃ Slow、135℃ Slow、150℃ Slow、Disable(default value
120℃ Stop)
7:ESC Overheat Protection：105℃ Stop、95℃ Stop、105℃ Stop、 95℃ Stop、Disable(default 105℃ Stop)
8:Running Mode：Fwd/Rev/Br、Fwd /Br、Fwd/Rev(default value
Fwd/Rev/Br)(Fwd=Forward、Brk=Brake、Rev=Reverse)
9:Drag Brake Force：0%、5%、10%、20%、30%(default value 0%).
Size:70*43*13mm
Weight:24g
1. Connect BEC wires with the program car then turn on the ESC.
2. The programme card display ITEM form 1 to 15 corresponding VALUE.
3. Please press the Key “IETM” to select different programs .
4. Please press the Key “VALUE” to select different value of the current
program.
5. Please press the Key “OK” to confirm above selections。 6. Please press the Key “RESET” to reset the factory setting.
1 x LED Programing Card
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
