Description:
Name: Car Body Sticker
Material:PVC
Size: 21.6in x 6.5in / 55cm x 16.5cm
Adhesion: strong
Applicable places: body stickers
Type: Outdoor Sticker
Series: 4x4 Sport
Color: Black/Red
Product category: body stickers
Packing list:
2x Car Body Sticker
Installation
Cleaning the surface with water before installing the vinyl will help to adhere and clean any contaminants that may cause blemishes.
1. Measure what you need and cut it with a knife.
2. Select the location for the attachment and clean it with a wet towel.
3. Spray thin water on the surface of the water.
4. Tearing the film and spraying water on it.
5. Dry with a hot air gun to remove air bubbles.
6. Use the tool again to carefully tap the bulb as it will affect the final result.
7. Use the utility knife to cut the rest of the film.
Note:
1. Due to manual measurement, please allow 1cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thank
1、 Please clean the car window glass with clean water and use a towel to wipe and clean the glass.
2、 Tear off the back adhesive film of the sticker and spray the back of the sticker and the car window glass with clean water.
3、 Align the sticker with the car window glass and confirm its position. Use a plastic scraper to slowly remove any bubbles and water inside the sticker.
4、 Tear off the protective film on the surface of the sticker, use a hot air blower or hair dryer to heat the sticker to fully adhere, and continue to use a plastic scraper to remove any remaining bubbles.
5、 Please do not wash the car within 3 days.
