Description:

Instructions before use:

1. Before use, please confirm that the battery pack is fully charged;

2. When the ear clamp is not in use, please ensure that the power cord and power supply of the ear clamp are disconnected (especially remember: when installing the ear tag and ear pin, the fingers holding the clamp should leave the machine to avoid pressing them);

3. After replacing different ear needles, they need to be tested before use. If marking is not possible, a gasket can be added to the thread of the ear needle.


Starting the battery installation process:

1. Open the packaging and insert the battery pack into the battery pack insertion interface of the ear tag pliers:

2. Turn on the power control switch, and the battery indicator light will be micro green

3. Take out the electric ear tag pliers, turn on the battery power switch, and the control box buzzer will sound twice when powered on for the first time. The button will be activated twice in a row;

4. Normal marking: Press the trigger and close the mouth. Release the trigger, open and close the jaws: Keep pressing the trigger, and the buzzer will sound long to indicate the jaws are closed. The buzzer sounds to adjust the size of the jaws;

5. Before starting work, press the machine intermittently to close the ear tag pliers a few times and check if they are closed

Normal;

6. Start working after normal operation.


Attention: Before adjusting or checking the function of the tool, please make sure to turn off the power of the tool and remove the battery pack.


Package Includes:

1 x Electric Ear Tag Pliers

2 x Batteries

1 x Box



Note:
Please allow minor errors due to manual measurement.
Item color displayed in photos may be showing slightly different since monitors are not calibrated same.

Payment:
Shipping:
Return Policy:
Feedback: