Feature:
1. Use a credit card, spatula or similar to smooth out your decal to make sure it sticks completely to the surface.
2. Carefully and slowly remove the transfer tape from the decal, making sure the decal sticks to the surface. If you see that part of the decal doesn't come loose from the transfer tape, press it back onto the surface and repeat the process.
Description:
Name: Car Body Sticker
Material:PVC
Size: 51.18x15.74in / 130x40cm
Adhesion: strong
Applicable places: body stickers
Type: Outdoor Sticker
Series: 4x4 Sport off Road
Color: Black
Product category: body stickers
Packing list:
2x Car Body Sticker
Note:
1. Due to manual measurement, please allow 1cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks
Attention: It is normal to find wrinkles or bubbles on the stickers upon receipt, and it will not affect installation and use. Because our stickers are made of vinyl material, they become soft when heated. Heating them during installation will remove wrinkles and achieve the best installation effect.
Installation steps:
1. Clean the car body and remove any oil, water, or dust from the surface.
2. After determining the installation position, fix the sticker on the car with tape to prevent any movement during installation.
3. Use a hot air gun or hair dryer to heat the sticker and make it soft.
4. Peel off the protective film of the adhesive while using a plastic scraper or bank card to scrape the sticker flat, eliminating bubbles and wrinkles.