Electrolytic Capacitors for : | | | |
breadbin style C64 with PCB Assy no: 250407, Rev A and is also suitable for KU-14194HB |
| | | |
| | | |
pack # CAPS02 - This capacitor set is for the original "breadbin" style C64 with PCB Assy no: 250407, Rev A and is also suitable for the relatively rare KU-14194HB |
| | | |
These packs of capacitors are specific to your own machine type, and are easy to identify |
by checking your motherboard's ASSY and REV version | | |
| | | |
Update your old capacitors and replace them wih new fresh and modern capacitors | |
this will help to extend the life of your Commodore 64 for many more years | |
(The original capacitors we not designed to last for 40 years and can potentially leek and damage your board and chips. |
before that happens, it is recommended that you solder in replacements to extend the Computer's life. |
| | | |
a soldering iron and basic soldering skills are required | | |
| | | |
Electrolytic capacitors are polarized, so make sure to note the polarity when replacing them |
(in other words, make sure the new ones go in exactly the right way round as the old ones !!) |
| | | |
| | | |
| | | |
| | | |
included in the pack: | | | |
| | | |
1 x 2200uf 16v axial (C19) (Revised to 2200uf 25v to increase flow and stability) | |
2 x 470uf 50v axial (C88, C90) | | | |
1 x 100uf 16v radial (C91) | | | |
14 x 10uf 25v radial (C8,C12,C13,C14,C15,C17,C24,C34,C57,C62,C65,C94,C102 (& spares) |
2 x 10uf 25v radial (C107, C108 - inside VIC-II shielded area) | | |