MAXKOSKO Heat Tape for Pipes for Pipe Freeze Protection, Self-Regulating Heating Cable for Metal and Plastic Home Pipes, Energy-Saving Water Pipe Heat Cable Keeps Water Flowing at -40°F, 120V



1.PIPE FREEZE PROTECTION: Pipe Heating Cable ,5 W/ft, heats up rapidly.This heating cable can keep water flowing at ambient temperatures down to -40°F (-40°C). It consists of a 3 Ft power cord Plus a heating cable varies from 3 Ft to 160Ft long.
2.HIGH TECH SELF-REGULATING HEATING TECHNOLOGY: The pipe heating cable smartly adjust its power output and never overheat or Burn. Water pipe heat tape can be installed with Straight-traced, Spiraled, or Overlapped.
3.ENERGY SAVING: Easy heat heating cable has a built-in thermostat that automatically turns on at 38°F, heat trace cable heats only when necessary.
4.EASY INSTALLATION: This water pipe heat cable is pre-assembled and ready to Install. You can easily DIY this heat tape for pipes by yourself by following the 5-steps instruction.(If you want to test before installation, please test at a temperature under 0°C (32°F)).
5.FOR BOTH PLASTIC AND METAL PIPES: The heat tape for water pipes protects commercial and residential plastic or metal water supply pipes from freezing in cold winter (Including RV, inlet pipe, drain pipe, sewer, palm tree frost protection, etc). And this pipe heating tape can freeze-protect pipes of up to 2in diameter.


FOUR STEPS EASY INSTALLTION
1.FIX THERMOSTTAT
Place the thermostat on the coldest end of the pipe,en-suring the thermostat is in di-rectly contacted to the pipe.
2.APPLY CABLE
Apply the heating cable to the pipe in a straight line,spiral or overlap on the pipe.
3.FIX CABLE
Secure the cable to the pipe with high-quality electrical tape at 6"intervals.
4.APPLY INSULATION
Wrap the entire pipe and cable,incluing the thermostat,with fiberglass pipe wrap,foam pipe insulation,or other equivalents.

TIPS