Description:
The XD05 BAL2 has gained significant attention as a portable audio decoder and device, thanks to its chip, powerful output , full metal body design, multiple interfaces, and high-capacity . A tool for you to have, stable and practical, buy it!
Features:
MORE DETAILS, MORE DIMENSIONAL FEELING: It uses two chips, two chips to process digital signals at the same , whether your , or , whether it is MP3 or DSD format, it can fully show more details.
BACK A MORE HIGH-FIDELITY SOUND: Its THD+N is reduced to 0.00065%. Through twochips with low phase noise crystal oscillator, combined with the new CPLD, the jitter is greatly reduced, making the infectious.
1500MW OUTPUT : Its output reaches 1500mW, which makes the diaphragm of the headphone fully vibrate and improves the loudness of the harmonics. Even the high impedance headphone with 300ohm can fully show its details, clarity, and elasticity, and fully enjoy the happiness brought by .
MULTIPLE INPUT INTERFACES: balanced input and 4.4mm balanced output, which is from digital input to headphone output are all balanced circuits, Let your balanced headphones have higher crosstalk and wider sound field, have a new experience.
ENHANCE THE SENSATION OF THE BASS: If the bass of your headphone is weak, you can get a bass feeling by turning on Bass and increasing the low frequency of the headphone.
TRANSMISSION ALSO HAS SOUND QUALITY: Can be connected to various playback devices, support for high definition formats such as aptX_HD and LDAC, Let the connection also have sound quality.
SUPPORT : Built-in 5000mah -ion polymer , which can playback continuously for more than 12 hours. When it is indoors, it can be powered by external (EXTE gear), so as to retain the . When it needs to be carried out, its internal is also full.
OLED SCREEN, DISPLAYING IMPORTANT INFORMATION: The OLED display clearly shows the audio sampling rate, input interface, and filter status, let you know at any whether it works at its .
Specifications:
Name:
Model: XD05 BAL2
: 3.8V/5000mAh
: USB IN≥9H, SPDIF IN≥15H, AUX IN≥24H
: ≤3 hours ( ), ≤6 hours (slow )
Screen: 0.91-inch OLED
Applicable OS: Compatible with , Linux, OS X, iOS, Android system
Frequency Response:
USB/SPDIF: 20Hz~20kHz(±0.5dB)
AMP: 10Hz~100kHz(±0.5dB)
Sampling Rate Support:
USB:
MQA: 8X
: 16-32BIT/44.1-768KHZ
DSD: DOP/ mode,DSD64-512
/Optical/Coaxial:
: 16-24BIT/44.1-192KHZ
DSD: DSD64(DOP)
Formats: AAC, SBC,APTX, APTX_LL, APTX_HD, LDAC
: +6/15dB
Bass: +6dB
6.5 Output Parameters:
Output : 1500mW (32Ω load)
THD+N: 0.0012%@1KHz
S/N: 120dB
Crosstalk: ≥72dB
4.4 Output Parameters:
Output : 1500mW (32Ω load)
THD+N: 0.00065%@1kHz
S/N: 120dB
Crosstalk: ≥100dB
AUX OUT parameters:
Output Level: 2.0Vrms
THD+N: 0.0008%@1kHz
S/N: 120dB
Crosstalk: ≥100dB
Item Size: 13.2*7.5*2.2cm/5.19*2.95*0.86in
Item Weight: 300g/10.58oz
Package Size: 25*16*5cm/9.84*6.30*1.96in
Package Weight: 800g/28.22oz
Package List: V10666
1 *
1 *
1 * Double-ended Type-C /Data Cable
1 * USB A to C
1 * Double-ended Type-C OTG Cable
1 * 8 Pin to Type-C OTG Cable
1 * Cable
1 * 6.5 to 3.5mm Headphone
2 * Amp Chip
1 * Screwdriver
5 * Screw
10 * Silicone Foot Mat
1 * User Manual
The XD05 BAL2 has gained significant attention as a portable audio decoder and device, thanks to its chip, powerful output , full metal body design, multiple interfaces, and high-capacity . A tool for you to have, stable and practical, buy it!
Features:
MORE DETAILS, MORE DIMENSIONAL FEELING: It uses two chips, two chips to process digital signals at the same , whether your , or , whether it is MP3 or DSD format, it can fully show more details.
BACK A MORE HIGH-FIDELITY SOUND: Its THD+N is reduced to 0.00065%. Through twochips with low phase noise crystal oscillator, combined with the new CPLD, the jitter is greatly reduced, making the infectious.
1500MW OUTPUT : Its output reaches 1500mW, which makes the diaphragm of the headphone fully vibrate and improves the loudness of the harmonics. Even the high impedance headphone with 300ohm can fully show its details, clarity, and elasticity, and fully enjoy the happiness brought by .
MULTIPLE INPUT INTERFACES: balanced input and 4.4mm balanced output, which is from digital input to headphone output are all balanced circuits, Let your balanced headphones have higher crosstalk and wider sound field, have a new experience.
ENHANCE THE SENSATION OF THE BASS: If the bass of your headphone is weak, you can get a bass feeling by turning on Bass and increasing the low frequency of the headphone.
TRANSMISSION ALSO HAS SOUND QUALITY: Can be connected to various playback devices, support for high definition formats such as aptX_HD and LDAC, Let the connection also have sound quality.
SUPPORT : Built-in 5000mah -ion polymer , which can playback continuously for more than 12 hours. When it is indoors, it can be powered by external (EXTE gear), so as to retain the . When it needs to be carried out, its internal is also full.
OLED SCREEN, DISPLAYING IMPORTANT INFORMATION: The OLED display clearly shows the audio sampling rate, input interface, and filter status, let you know at any whether it works at its .
Specifications:
Name:
Model: XD05 BAL2
: 3.8V/5000mAh
: USB IN≥9H, SPDIF IN≥15H, AUX IN≥24H
: ≤3 hours ( ), ≤6 hours (slow )
Screen: 0.91-inch OLED
Applicable OS: Compatible with , Linux, OS X, iOS, Android system
Frequency Response:
USB/SPDIF: 20Hz~20kHz(±0.5dB)
AMP: 10Hz~100kHz(±0.5dB)
Sampling Rate Support:
USB:
MQA: 8X
: 16-32BIT/44.1-768KHZ
DSD: DOP/ mode,DSD64-512
/Optical/Coaxial:
: 16-24BIT/44.1-192KHZ
DSD: DSD64(DOP)
Formats: AAC, SBC,APTX, APTX_LL, APTX_HD, LDAC
: +6/15dB
Bass: +6dB
6.5 Output Parameters:
Output : 1500mW (32Ω load)
THD+N: 0.0012%@1KHz
S/N: 120dB
Crosstalk: ≥72dB
4.4 Output Parameters:
Output : 1500mW (32Ω load)
THD+N: 0.00065%@1kHz
S/N: 120dB
Crosstalk: ≥100dB
AUX OUT parameters:
Output Level: 2.0Vrms
THD+N: 0.0008%@1kHz
S/N: 120dB
Crosstalk: ≥100dB
Item Size: 13.2*7.5*2.2cm/5.19*2.95*0.86in
Item Weight: 300g/10.58oz
Package Size: 25*16*5cm/9.84*6.30*1.96in
Package Weight: 800g/28.22oz
Package List: V10666
1 *
1 *
1 * Double-ended Type-C /Data Cable
1 * USB A to C
1 * Double-ended Type-C OTG Cable
1 * 8 Pin to Type-C OTG Cable
1 * Cable
1 * 6.5 to 3.5mm Headphone
2 * Amp Chip
1 * Screwdriver
5 * Screw
10 * Silicone Foot Mat
1 * User Manual