It has high biocompatibility with oral tissue. Ensure a healthy oral environment and a high degree of comfort.
The denture base printed with our 3166 resin are durable and resist fracture.
Pink color, natural looking; Maintains color stability during 3D printing.
| Project | Content | Data value | Testing method |
Physical and chemical properties (before curing) | color | Pink | |
| Viscosity | 450-750cps(25℃) | ASTM D1084-1997 | |
| Density | 1.05-1.15 | ASM D1875-69(1980) | |
Physical and chemical properties (after curing) | Curing depth | 500~700μm | |
| Shrinkage | ＜1% | ||
| Hardness | 70~80D | ASTM D2240-05(2010) | |
| bending strength | ＞3kg | Test strip 4mm |
1- Washing
– After the printing is completed, wash the part as attached to the building plate with alcohol (>%95) for 3 minutes.
– Make sure that alcohol covers the part entirely when washing.
– Since the Denture resin is biocompatible never wash it with the alcohol used for other resins before.
– Use a brush to remove uncured resin if needed.
– Do not over-wash, it may cause deterioration in dimensions of the part.
2- Drying
– Use air-compressor to dry the washed part.
– Make sure that the part is dry and uncured resin is cleaned up completely.
– If still uncured resin left on the part, wash it with fresh alcohol and dry again.
3- Part Removal
– Remove the printed part from the building plate using a scraping tool.
– Be very careful not to damage the model.
4- Post Curing
– UV post-curing for 5 minutes
– After the post curing, supports should be removed from the model cautiously and then desired sandblasting and polishing can be done