Top Reasons To Get Our ELM327 USB V1.5 PIC18F 25K80:

1. Firmware Version: V1.5 (Main IC PIC8F25K80, Driver IC PL2303 )

2. It supports CAN Protocols and most OBD2 protocols.

ISO15765-4 (CAN)

ISO14230-4 (KWP2000)

ISO9141-2

J1850 VPW

J1850 PWM

Please Note :

1. CD was easily to get broken, so If your CD was broken during the delivery. Please contact us and we will give you an software download link or send the software to you through Email.

The Delivery Time always need 20-60 days. To South America, Africa, may need about 60-90days. So if your protection time expired, please contact us to extend it.

Do Not Open Dispute Or Give Negative Feedback!!!!! Any Problem, Contact Us First!!!!! Thanks

2. This ELM327 Scanner Only Works With OBDII Standard Protocols 12V Gasoline Cars. Do Not Work With Diesel&Trucks.

3. ELM327 can support multi-brands, we can not test on each car. If you do not sure whether it work with your car or not, please consider it or you do not buy it.

4. ELM327 USB supported PC Windows XP Only. Do Not support Other Windows System!!! Do Not Have Bluetooth or WiFi Function.

Multi-Languages :

Czech, Denish,German, English, Spanish, French, Croatian, Hungarian, Italian, Polish, Serbian,Turkish,No Russian Language

Description:

OBD-II Software for ELM327 USB is a free coding that allows you to use your PC and a hardware interface to get the information from your car's computer.

The coding is very user-friendly, and easy to learn. It is also very easy to install: simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the coding, simply delete the entire contents of the folder where the coding resides.

Specifications:

Output protocol: RS232

Baud rate: 9600 or 38400

Indicator LEDs: OBD Tx/Rx, RS232 Tx/Rx, Power

Operating voltage: 12V, internal protection from short circuits/overvoltages

Nominal idle current: 45 mA

Support two platforms - DOS and Windows.

Software: ScanMaster-ELM, ScanTool.net, PCMSCAN

Installation Steps:

1. Install "ScanTool(dot)net" software from the CD

2. Connect OBDII cable to the obd port on your car.

3. Connect OBDII cable with your USB ELM327 scanner. Then power light is on, "ODB TX/RX" flashing, means connection well.

4. Use USB cable connect your ELM327 and computer. Then system will remind you "find new firmware", Install the USB driver. Enter into your computer's "Device Manager", click it will find "USB Serial Port", remember the COM Number.

5. Start "ScanTool(dot)net" software. Click "ScanTool(dot)netv1.13 for windows" coding, choose "options",click COM number, confirm.

6. Installation finished, you can diagnose your car now.