ESP32-S3 Entwicklerboard USB-C UNO Formfaktor

ESP32-S3 UNO USB-C ESP32-WROOM N16R8 8M PSRAM 16M Flash Python Entwickler Development Board

ESP32-S3 UNO form factor USB-C Development Board © androegg

ESP32-S3 UNO form factor USB-C Development Board © androegg

ESP32-S3 UNO form factor USB-C Development Board Pinout © androegg

ESP32-S3 UNO form factor USB-C Development Board Dimensions © androegg

  

ESP32-S3 Entwicklerboard im UNO Formfaktor basiert auf dem ESP32-S3 N16R8 mit 8MB PSRAM und 16MB SPI Flash.

ESP32-S3 USB-C Entwicklerboard von verfügt über

  • AMS1117 3,3V Spannungskonverter
  • CH340 USB TTL Converter
  • Reset Taster
  • Power LED
  • WS2812 RGB LED (Pin8)
  • 5,5x2,1 mm Hohlsteckeranschlus für Spannungsversorgungen von 5-18V

    •  

    Sämtliche Anschlüsse des ESP32-S3 Modul werden auf Pinsockel ausgeführt.

    Das ESP32-S3 eignet sich für

  • Espressif ESP-IDF SDK
  • Python
  • Python Thonny
  • CircuitPython
  • Espressif IDF
  • Arduino (Espressif ESP32 Arduino Core 2.0.3 und höher)
  • Tasmota (tasmota32s3- binaries)

    •  

    Das ESP32-S3 Entwicklerboard basiert auf der Xtensa® Dual Core 32bit MCU mit bis zu 240MHz. Kombination mit einem 16MB SPI Flash Speicher und 8MB PSRAM

     

    ESP32-S3 UNO Entwicklerboard

    Im Vergleich zu typischen ESP32 Entwicklerboards verfügt dieses ESP32 -S3 Entwicklerboard zusätzlich über einen 5,5x2,1 mm Hohlsteckeranschluss für Spanungsversorgungen von 5-18V.

    Über eine integrierte USB-C Schnittstelle kann sowohl die Spannungsversorgung als auch serielle Anbindung erfolgen.

    Das ESP32-S3 UNO Entwickler Board verfügt über eine CH340C USB TTL Konverter, sodass eine direkte, serielle Kommunikation über die USB Schnittstelle erfolgen kann.

    Das ESP32-S3 Entwickler Board unterstützt

  • 802.11 b/g/n Standard
  • HT40 WLan Transceiver
  • Bluetooth bis 4.2
  • Takfrequenz 240MHz
  • SRAM 512kBytes
  • 8MB PSRAM
  • 16MB SPI Flash
  • bis zu 45 GPIO
  • unterstützte Schnittstellen
    SPI SD Karte,
    UART,
    SPI,
    SDIO,
    I2C,
    LED PWM,
    Motor PWM,
    I2S,
    IR,
    pulse counter,
    GPIO, capacitive touch sensor,
    ADC 12-bit (bis zu 20 Kanäle),
    DAC,
    Two-Wire Automotive Interface (TWAI®), compatible with ISO11898-1 (CAN Specification 2.0)

    •  

    ESP32-S3 UNO Development Board based on ESP32-S3 N16R8 MCU with 8MB PSRAM and 16MB SPI Flash.

    The ESP32-S3 USB-C has

  • AMS1117 3.3V Voltage Converter
  • CH340 USB TTL Converter
  • Reset Button
  • Power LED
  • WS2812 RGB LED (Pin8)
  • 5.5x2.1 mm Barrel Jack socket connector for 5-18V power supply

    • on board.

     

    The ESP32-S3 Developmnet Baord supports

  • Espressif ESP-IDF SDK
  • Python
  • Python Thonny
  • CircuitPython
  • Espressif IDF
  • Arduino (Espressif ESP32 Arduino Core 2.0.3 and later)
  • Tasmota (tasmota32s3- binaries)

    •  

     

    The ESP32-S3 Development Board is based on Xtensa® Dual Core 32bit MCU with up to 240 MHz. in combination with a 16MB Flash and 8MB PSRAM

     

    ESP32-S3 UNO Development Board

    Compared to typical ESP32 Development Boards, this ESP32-S3 UNO Development Board has an additional 5.5x2.1 mm Barrel Jack socket connector and supports power supply from 5-18V.

    The 5V main power supply is supported thru USB-C Socket.

    For serial communication the ESP32 S3UNO Development Board got also a CH340 USB TTL Converter on board (connected to USB-C Socket)

     

    The ESP32-S3 Development Board supports

  • 802.11 b/g/n Standard
  • HT40 WLan Transceiver
  • Bluetooth up to 4.2
  • Frequency 240MHz
  • SRAM 512kBytes
  • 8MB PSARM
  • 16MB SPI Flash
  • up to 45 GPIO
  • supported Interfaces
    SPI SD Karte,
    UART,
    SPI,
    SDIO,
    I2C,
    LED PWM,
    Motor PWM,
    I2S,
    IR,
    pulse counter,
    GPIO, capacitive touch sensor,
    ADC 12-bit (up to 20 channels),
    DAC,
    Two-Wire Automotive Interface (TWAI®), compatible with ISO11898-1 (CAN Specification 2.0)

    •  

    Ihre Vorteile

    • wir berechnen Nur 1 mal Versandkosten (ganz gleich wie viele Artikel)
    • Versand erfolgt 6 Tage die Woche (Mo. - Sa.)
    • Bestellungen bis 12:00 Uhr Versand noch am gleichen Tag
    • Fragen oder Problemen? kurze Nachricht genügt

     

    your benefit

    • we only charge shipping costs once
    • we ship 6 days a week (Mo. - Sa.)
    • Orders before 12:00 same day shipped
    • Questions or Problems? Just send a message

    ESP32-S32 UNO Formfactor Development Board Features:

    • 5V Power Supply thru USB-C Connector
    • 5-18V Power Supply thru Barrel Jack Connector
    • USB-C (OTG, UART)
    • CH340 USB TTL Converter on board
    • supports up to 45 GPIO
    • CPU / MPU:
      Frequency: up to 240 MHz. based on Tensilica LX7
      448 KByte ROM size
      520 KByte SRAM size
      8MB PSRAM
    • SPI Flash:
      Flash memory: 16MB
      clock frequency: 75 MHz.
      Page program: up to 256 bytes in 0.64ms (TYP) Sector erase: 512Kb in 0.6s
      Bulk erase: 17 - 23 s
      Hardware write protection: protected area size defined by nonvolatile bits BP0, BP1, BP2
      Deep power-down: 1μA (TYP)
      Write Cycles: > 100,000 write cycles per sector Data retention: > 20 Years
    • 802.11 b/g/n/e/i protocol
    • supports Wi-Fi Direct (P2P)
    • soft-AP Integrated TCP/IP protocol stack
    • 802.11 n (2.4 GHz), up to 150 Mbps
    • 802.11 e: QoS for wireless multimedia technology
    • Block ACK
    • Fragmentation and defragmentation
    • Automatic Beacon monitoring/scanning
    • 802.11 i security features: pre-authentication and TSN
    • Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
    • Infrastructure BSS Station mode/SoftAP mode Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
    • UMA compliant and certified
    • Antenna diversity and selection
    • Compliant with Bluetooth v4.2 BR/EDR and BLE specification
    • deep sleep current of < 2.5uA
    • Class-1, class-2 and class-3 transmitter without external power amplifier
    • Enhanced power control
    • +10 dBm transmitting power
    • NZIF receiver with -98 dBm sensitivity
    • Adaptive Frequency Hopping (AFH)
    • Standard HCI based on SDIO/SPI/UART
    • High speed UART HCI, up to 4 Mbps
    • BT 4.2 controller and host stack
    • Service Discover Protocol (SDP)
    • General Access Profile (GAP)
    • Security Manage Protocol (SMP)
    • Bluetooth Low Energy (BLE)
    • ATT/GATT
    • HID
    • All GATT-based profile supported
    • SPP-Like GATT-based profile
    • BLE Beacon
    • A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
    • CVSD and SBC for audio codec
    • Bluetooth Piconet and Scatternet