Specifications:
Pay attention: Power Allowance -10%~+5%
01/Notices:The heaters for water/oil,cannot dry burning,heating in oil keep under 300 degree.
02/Features: SUS304 thickened tube,High temperature resistance wire and high temperature insulation powder.
03/Application:Suitable for Heat-conducting oil stove, large water tank, boiler, reaction kettle.
To dear all,
1. Heaters are industrial products, not vase. some may have flaws, such as weld, such as stainless steel trace and polish trace,that's normal.
2. Because the heating wire inside the heater tube is made of OCr25A15 which is Magnetic, it is normal that the element can be adsorbed by magnet.
3. Under the condition of insulation, the international standard for the heater power accept allowance -10% to 5%.
If you are care about these, please think twice before make order. We do not accept dispute or negative feedback about these.
Thank you for your attention.
Custom Made
We accept for different heaters.if you need custom,please offer drawing,also actual picture will be more helpful.
ln order to improve efficiency,please offer drawing with the following parameter,thanks.
①Thread Size example: DN25/DN32/DN40/DN50 ect.
②Tube Length example: 190mm/210mm/250mm ect.
③Tube Diameter example: 8mm/10mm/12mm ect.
④Power example: 3KW/4.5KW/6KW ect.
⑤Voltage example: 220V/380v ect.
⑥Tube Material example: suS201/SUS304/Copper ect.
⑦Thread Material example: suS201/SUS304/Copper ect.