Here I post a few quick links:

Software https://github.com/SpacehuhnTech/esp8266_deauther

Hardware https://github.com/lspoplove/Deauther-Project

WiKi https://github.com/SpacehuhnTech/esp8266_deauther/wiki

FAQ https://github.com/SpacehuhnTech/esp8266_deauther/wiki/FAQ

Burning tutorial https://github.com/SpacehuhnTech/esp8266_deauther/wiki/Installation

Flash tool https://github.com/nodemcu/nodemcu-flasher

Firmware download https://github.com/SpacehuhnTech/esp8266_deauther/releases

Product Quick Upgrade Tutorial:

1. Download the CP2102 driver (https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)

2. Download the firmware (https://github.com/SpacehuhnTech/esp8266_deauther/releases)

3. Download nodemcu-flasher (https://github.com/nodemcu/nodemcu-flasher)

4. Click the gear to select the corresponding binfile. The burning mode selects DOUT. The rate selects 961200. After clicking the Flash start, wait for the progress bar to reach the end and then power on again.

Detailed tutorial:

Link: https://pan.baidu.com/s/1SWpqicQh5WGcdbg1nwEIwg Extraction : 68fh

Update

DifferenceDeauther WristbandDeauther Watch V1Deauther Watch V2

Battery 500mah 500mah 800mah

3D Print Case No YES YES

Screen Protection No No YES

Battery Indicate No No YES

Power Switch Plastic Plastic Metal

Charging Current 0.5A 0.5A 0.8A

RTC No No YES

Breakout GPIOs No YES YES

Color Black&Red Black Black&White

What is it?

Deauther Watch is still an ESP8266 development board, but you can wear it like a smartwatch.

This ESP8266 development board comes with a 500mAh battery, OLED display and a 3-way momentary slide switch .

It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.

Please note that the ESP8266 does only support 2.4GHz. For more details on the software, visit here.

You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.

GPIOs and hardware info：

Display: SH1106 1.3" OLED

Display SDA: GPIO 5 ()

Display SCL/SCK: GPIO 4 (D2)

W 812b LED: GPIO 15 (D8)

Button Up: GPIO 12

Button Down: GPIO 13

Button Select: GPIO 14

High Light LED: GPIO 16

Side Button: GPIO0,RST

What makes it special?

Only ~80mA power usage

500 mA charging curren

Included 5dB FPC antenna and 2dB antenn

Protection: short, overcharging, over discharging, temperatur

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.