Brian Tooley Racing (BTR) Truck Cam Kit w/ Camshaft Installation Package - for 1999-2013 GM Truck Applications (07-13 Models will require AFM and/or VVT Delete if Equipped - message us for more info).
Brian Tooley Racing's Truck Cam Kits are an excellent selection for GM trucks and SUVs equipped with 4.8L, 5.3L, 6.0L, or 6.2L engines. These camshafts are designed to increase power without sacrificing low-end torque and are great choice for heavier vehicles such as Silverado, Sierra, Yukon, Tahoe, Suburban, Escalade, etc.
Brian Tooley Racing's truck cams were designed with low lift so BTR's standard beehive springs and OE pushrods can be used, making these the most affordable truck cams available.
This kit includes some of the most common components needed when installing an aftermarket cam kit in your Gen III or Gen IV LS combination.
Included with this kit:
- Complete BTR Truck Cam Kit (detailed below) with your choice of truck cam
- BTR 4.8L/5.3L or GM 6.0L/6.2L Headgaskets
- Front Timing Cover Gasket
- Waterpump Gaskets
- Front Crank Seal
- Harmonic Balancer (crank) Bolt
- Complete Set of 16 LS7 Style Lifters
- Set of 4 GM Lifter Trays
BTR Truck Camshaft Kit Includes:
- BTR .660 Dual Spring Kit w/ Steel Retainers (SK001)
- 7.400" 5/16 Hardened Pushrods
- Your Choice of BTR Truck Cam (Stage 1, 2, 3, or 4)
BTR Truck Cam Specs:
- Stage I Camshaft Specs (BTR30612120): 206/212 .553"/.553" 112 LSA
- Stage II Camshaft Specs (BTR31218110): 212/218 .553"/.553" 111 LSA
- Stage III Camshaft Specs (BTR31824100): 218/224 .553"/.553" 110 LSA
- Stage IV Camshaft Specs (BTR32430090): 224/230 .553"/.553" 109 LSA
- BTR "Torque" Camshaft Specs (30202111R1): 202/202 .511"/.511" 111+1
- BTR "Truck Norris" Camshaft Specs: 212/22X, .552/.552, 107 LSA
Note: These kits are designed for Gen III/Gen IV engine applications only. 2014+ GM Trucks (2015+ SUVs) use the Gen V style engines which are not compatible with these components.
Note: Replacement of the head gaskets will require head bolt replacement (not included), however, GM used several different head bolt designs. If you would like to add a head bolt kit, or need assistance identifying which kit you need, please do not hesitate to reach out to us directly.
Note: These head gaskets cannot be used with early style (98-01) LS1 heads which feature the "notch" on the deck. Some 99-00 truck cylinder heads had this notch as well (some, but not all 862 castings). If that notch is present on the deck of the cylinder head, these head gaskets cannot be used.
