Brew Unit Assembly for Jura - A1/A5/A7/A9/Ena Micro | 70173
Item Description:
If your Brew Group is nearing the end of its life, then you will hear the Brew Group struggling to obtain the correct position, or notice the coffee grounds are watery when dumped into the Used Coffee Container. Replacing gaskets and lubricating the Brew Group every 6 months will dramatically increase the life of the Brew Group.
Complete brewing unit with coffee grounds scraper and vertical guide, as shown in picture. Brewing unit should be replaced every 5 years or less for best possible coffee extraction from your JURA automatic coffee machine. Replacing the gaskets in the brew unit does not improve the coffee quality in our experience.
Once a month, it is a good idea to lubricate the brewing unit with silicone grease. You can buy lubricant here https://www.ebay.com/itm/284196341532 . The device will not wear out so quickly.
Scope of Delivery:
- 1x brew unit as shown
Compatible Models:
- A1
- A5 Impressa
- A7
- A9 Impressa
- ENA Micro 1
- ENA Micro 5
- ENA Micro 8
- ENA Micro 9
- ENA Micro 90
- ENA Micro Easy
Browse by Categories
Product
All products are new and original from the factory. Please see the description about suitable models of particular item or part. If you have any questions, feel free to chat with us in the Contact section and we will happily answer them.
Shipping
All items have free shipping with standard shipping to US 14-30 days. Possible Express shipping - it takes approximately 5-8 working days. If an item is not delivered on time, please contact us before submitting a dispute.
Contact
Your POSITIVE feedback is very important to us. If for any reason you feel that you have not been treated up to the standards and feel like giving NEUTRAL or NEGATIVE feedback, please, kindly contact us - so that we can resolve the issue ASAP. We can only address the concerns that are brought to our attention.