Victron Smart BatterProtect 12/24-100A [BPR110022000].
- We offer fast same day item packing and shipping.
- Fast and Free Australia Post Express postage service on this item.
- 5 Year Product Warranty
- Local pickup available and aftersales Support.
Smart - Bluetooth connection for programming
12/24V - Supports 12 and 24 volt batteries (automatically detects)
100A - Max Continuous load current (peak 600A)
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged.
It also provides an alternative to disable chargers without a remote on/off port to protect from over-voltage.
Features include:
- Protection of the battery against excessive discharge and can be used as a system on/off switch.
- 12/24V auto ranging. The Smart BatteryProtect automatically detects system voltage one time only.
- Easy Bluetooth programming.
- A special setting for Lithium batteries. This feature allows external control from a BMS like the VE.Bus BMS or Lynx Smart BMS. If the load disconnect output of a BMS is connected to the Remote H input and the signal becomes free-floating, the load is immediately disconnected.
- Ultra-low current consumption of 1.4mA with Bluetooth on: This is important in case of Li-ion batteries, especially after low cell voltage shutdown.
- Over voltage protection: To prevent damage to sensitive loads due to over voltage. The load is disconnected whenever the DC voltage exceeds 16.3V (for a 12V system) respectively 32.6V (for a 24V system).
- Ignition proof: No relays but MOSFET switches, and therefore no sparks.
- Delayed alarm output: The alarm output is activated if the battery voltage drops below the preset disconnect level fore more than 12 seconds. Starting the engine will therefore not activate the alarm.
- Delayed load disconnect and delayed reconnect. Responding quickly within this delay, for example by reducing the load or starting a generator or charger to charge the batteries, can prevent loads from being switched off.