• Features:
  •  
  • 1. Fitment: Engine Alignment Bar Tool for MerCruiser Sterndrives including: Pre-Alpha "R", Alpha One "MR", Generation II, all Bravo models. For MerCruiser P/N 91-805475A1, P/N 91-57797A3. For SX P/N 3851083 and for OMC Cobra P/N 18-4442.
  •  
  • 2. Alignment Check: This Align Tools can be used to check engine coupler alignment with the gimbal bearing and drive which reduce damage on the bearing, drive and coupler. (Note: Need to drill the hole in the alignment tool for correct lineup. )
  •  
  • 3. Material: Made of superior material steel which have an unparalleled lifespan with great durability.

    • Lang2033

    Gimbal Bearing Installer,Bearing Puller Remover and Enigne Alignment Tools Set for Alpha,for Mercruiser,for Bravo, for Omc，for yamaha sterndrive 89-92

    Features:

     

    1. Fitment: Engine Alignment Bar Tool for MerCruiser Sterndrives including: Pre-Alpha "R", Alpha One "MR", Generation II, all Bravo models. For MerCruiser P/N 91-805475A1, P/N 91-57797A3. For SX P/N 3851083 and for OMC Cobra P/N 18-4442.

     

    2. Alignment Check: This Align Tools can be used to check engine coupler alignment with the gimbal bearing and drive which reduce damage on the bearing, drive and coupler. (Note: Need to drill the hole in the alignment tool for correct lineup. )

     

    3. Material: Made of superior material steel which have an unparalleled lifespan with great durability.


    4. Function: This tool set allows easy removal/installation of the Gimbal bearing and an Alignment tool to align the engine. This set includes eye bolts for positioning tools for suspension.


    5. Gimbal Bearing Puller Remover: This tool allows easy removal of the Gimbal bearing. Just use a wrench to turn the end of the tool to pull the bearing.


    6. Engine Alignment Tool: Used to check your alignment, it will save your coupler and gimbal bearing. The alignment tool will need a hole drilled in it to mount the gimbal bearing driver. Eyebolt included so the Alignment tool can be hung up.


    7. Gimbal Bearing Installation Tool: This requires a hole drilled in your alignment tool. You will need an Engine Alignment Tool to use this tool.

     

    Description:

     

     

     

     

     

    Gimbal Bearing Removal:

     

    1. Insert the rod into the gimbal bearing.
    2. Once it's in there, we can place the plate.
    3. Once you are getting close to being snug, put the center rod in till it's tight.
    4. Use a large adjustable wrench and just start turning this around and around. And then it will start going easy. Remove the tool. The gimbal bearing is off.

     

     

    Gimbal Bearing Installaion:

     

    1. Drill the holes on the alignment tool.
    2. Install the bearing install adapter on the alignment tool.
    3. Install the gimbal bearing , then the tool is pushed all the way in.
    4. Work with a hammer mace the gimbal bearing again to ensure it attach the bottom

     

     

    Package Included: 

     

    1x Eyebolt

    1x Gimbal Bearing Puller

    1x Engine Alignment Tool

    1x Gimbal Bearing Installation Tool



    Payment

    1. Payment methods accepted: Payoneer.Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
    2. All major credit cards are accepted through our secure payment processor Payoneer.
    3. We ship items to Your Ebay address.Please make sure your Ebay address is correct before you pay,cause it cannot be changed once the order shipped out.

    Shipping

    1. Item will be shipped within 1 business day after your payment cleared.
    2. Item will be shipped by AU Post .
    3.Delivery time depends on destination and other factors,please feel free to contact us by email if you cannot get your order in time.
     

    Please read the shipment and payment detail carefully before you bid.

    Returns

    1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).

    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.

    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

    Contact Us

    We maintain high standards of excellence Four 5-star rating and strive for 100% customer satisfaction! Positive Feedback is very important to us. If you are not satisfied with our product or our Service,please feel free to contact us immediately BEFORE you leave neutral or negativefeedback,we will try our best to resolve any problem and make you satisfied.


    Please contact us via ebay using"Contact member". Please include your ebay item number or order number in all communications.We will respond within 1 business day or less.We apologize for the late reply during the holidays.Thank you for your understanding.

    Our office hours is as below :
     

    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
    - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
    And our office is closed on Sunday and public holidays (Hong Kong)
     

    Lang2033

    Store Category
     Store Home
     Black Smith DIY
     Generator Accessories
     Car & Truck Parts
     Jeep Wrangler JK Parts
     Mustang
     Wrench Caps
     Jeep Grand Cherokee
     Tools
     Jeep Renegade
     Toyota
     Jeep Wrangler JL Parts
     Rear View Camera
     Jeep Compass & Patriot
     Jeep Wrangler TJ Parts
     Car Cane
     UTV / ATV Accessories
     Boat Parts
     Home & Garden
    Custom Item
    Mustang Most Wanted!
    content_src_url
    Hot Item
    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Gimbal Bearing Installer,Bearing Puller Remover and Enigne Alignment Tools Set for Alpha,for Mercruiser,for Bravo, for Omc，for yamaha sterndrive 89-92

    Features:

     

    1. Fitment: Engine Alignment Bar Tool for MerCruiser Sterndrives including: Pre-Alpha "R", Alpha One "MR", Generation II, all Bravo models. For MerCruiser P/N 91-805475A1, P/N 91-57797A3. For SX P/N 3851083 and for OMC Cobra P/N 18-4442.

     

    2. Alignment Check: This Align Tools can be used to check engine coupler alignment with the gimbal bearing and drive which reduce damage on the bearing, drive and coupler. (Note: Need to drill the hole in the alignment tool for correct lineup. )

     

    3. Material: Made of superior material steel which have an unparalleled lifespan with great durability.


    4. Function: This tool set allows easy removal/installation of the Gimbal bearing and an Alignment tool to align the engine. This set includes eye bolts for positioning tools for suspension.


    5. Gimbal Bearing Puller Remover: This tool allows easy removal of the Gimbal bearing. Just use a wrench to turn the end of the tool to pull the bearing.


    6. Engine Alignment Tool: Used to check your alignment, it will save your coupler and gimbal bearing. The alignment tool will need a hole drilled in it to mount the gimbal bearing driver. Eyebolt included so the Alignment tool can be hung up.


    7. Gimbal Bearing Installation Tool: This requires a hole drilled in your alignment tool. You will need an Engine Alignment Tool to use this tool.

     

    Description:

     

     

     

     

     

    Gimbal Bearing Removal:

     

    1. Insert the rod into the gimbal bearing.
    2. Once it's in there, we can place the plate.
    3. Once you are getting close to being snug, put the center rod in till it's tight.
    4. Use a large adjustable wrench and just start turning this around and around. And then it will start going easy. Remove the tool. The gimbal bearing is off.

     

     

    Gimbal Bearing Installaion:

     

    1. Drill the holes on the alignment tool.
    2. Install the bearing install adapter on the alignment tool.
    3. Install the gimbal bearing , then the tool is pushed all the way in.
    4. Work with a hammer mace the gimbal bearing again to ensure it attach the bottom

     

     

    Package Included: 

     

    1x Eyebolt

    1x Gimbal Bearing Puller

    1x Engine Alignment Tool

    1x Gimbal Bearing Installation Tool



    1. Payment methods accepted: Payoneer.Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
    2. All major credit cards are accepted through our secure payment processor Payoneer.
    3. We ship items to Your Ebay address.Please make sure your Ebay address is correct before you pay,cause it cannot be changed once the order shipped out.

    1. Item will be shipped within 1 business day after your payment cleared.
    2. Item will be shipped by AU Post .
    3.Delivery time depends on destination and other factors,please feel free to contact us by email if you cannot get your order in time.
     

    Please read the shipment and payment detail carefully before you bid.

    1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).

    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.

    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

    We maintain high standards of excellence Four 5-star rating and strive for 100% customer satisfaction! Positive Feedback is very important to us. If you are not satisfied with our product or our Service,please feel free to contact us immediately BEFORE you leave neutral or negativefeedback,we will try our best to resolve any problem and make you satisfied.


    Please contact us via ebay using"Contact member". Please include your ebay item number or order number in all communications.We will respond within 1 business day or less.We apologize for the late reply during the holidays.Thank you for your understanding.

    Our office hours is as below :
     

    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
    - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
    And our office is closed on Sunday and public holidays (Hong Kong)
     

    All right reserved.