Fluke 28 II/EUR Industrial Multimeter Details

Purpose-built for demanding industrial environments, the Fluke 28 II is the hardwearing digital multimeter you've been looking for.

The 28 II is IP67 rated (both waterproof and dustproof), has MHSA approval, has an extended operating temperature range of -15 to +55°C (and 95% humidity) and has even been designed to resist drops up to a height of 3m (10ft)! For those working in demanding industrial environments where other DMMs might be easily damaged, the Fluke 28 II is ideal.

This digital multimeter can test AC/DC voltage from 0.1mV to 1000V, DC/AC current from 0.1μA to 10A, resistance from 0.1Ω to 50MΩ, capacitance from 1nF to 9999μF, frequency from 0.5 to 199.99kHz and temperature from -200 to +1090°C.

Fluke's 28 II is a true RMS digital multimeter, ensuring accurate results when measuring AC voltage/current on non linear signals. It also includes a high resolution, 20000 count display mode, backlit keypad buttons for use in poor light, a backlight for the screen and long battery life (lasts - on average - for up to 800 hours!).

Fluke 28 II/EUR Industrial Multimeter Key Features

  • Durable digital multimeter with drop-tested casing and protection against water/dust damage
  • High resolution 20000 count display mode
  • Backlit keypad buttons and backlit screen for using the device in darkened conditions
  • Reversible holster
  • Withstands hazardous 8000 volt spikes caused by load switching and faults on industrial circuits
  • Complies with second edition IEC and ANSI electrical safety standards
  • Long battery life of 800 hours
  • Auto/manual ranging DMM
  • True-RMS AC voltage and current measurements
  • Unique electrically noisy testing function
  • Peak MIN/MAX
  • MIN/MAX/AVG recording
  • Resistance, continuity and diode testing
  • Built-in thermometer
  • Extended AC voltage bandwidth of 15Hz to 20kHz
  • Frequency to 200kHz
  • 10000μF capacitance range
  • Measure current up to 10A
  • Measure voltage up to 1000V

Full List of Products Included

  • Fluke 28 II/EUR Industrial Multimeter
  • Battery
  • Manual
  • Software
  • Test Leads
  • Temperature Probe
  • Clips
  • Holster

Fluke 28 II/EUR Technical Specifications

DC Voltage  
Range 0.1mV to 1000V
Accuracy 0.05% + 1
AC Voltage  
Range 0.1mV to 1000V
Accuracy 0.7% + 4
DC Current  
Range 0.1μA to 10A
Accuracy 0.2% + 4
AC Current  
Range 0.1μA tp 10A
Accuracy 1.0% + 2
Resistance  
Range 0.1Ω to 50MΩ
Capacitance  
Range 1nF to 9999μF
Temperature  
Range -200 to +1090°C
General Specs  
Display Counts 6000/19,999
Low Pass Filter (Measurement on VSDs) Yes
IP Rating IP67
Power 3 x AA batteries
Battery Life 800 hours
Peak Transient Capture 250μS
MIN/MAX/AVG Yes
Reading Hold Yes
Relative Readings (Zero) Yes
Safety CAT IV 600V/1000V
External Protection Rubber holster
Drop Test 10 feet drop test
Dustproof/Waterproof IP67
Warranty Limited liftetime
Size (H x W x L) with Holster 6.35cm x 10.0cm x 19.81cm (2.5 x 3.93 x 7.8")
Weight with Holster 698.5g (1.54lbs)