Reference: VM306456401



DENALI DR1 LED auxiliary headlight kit with CANsmart™ GEN II controller.

Kit consisting of:

  • (x2)-DENALI DR1 DataDim™ LED auxiliary headlight
  • (x1)-DENALI CANsmart™ GEN II CANBus Controller-Honda Africa Twin 1100

Component Description:

1-DENALI DR1 DATADIM™ LED AUXILIARY HEADLIGHT

The unique oversized reflector on the DR1 creates an industry-leading 1000-foot beam distance from the single pair of 10-watt LEDs. No other 10 watt LED comes close. The DR1 is ideal for night driving conditions where maximum beam distance is desired. The included pair of True-Hybrid™ lenses has an official E-Mark certification and creates a more balanced combination of distance and width.

Our TriOptic™ lens system means each light module has a factory-installed clear spot lens, but also includes an optional flood lens to allow three different beam options when used as a pair (spot, flood or hybrid ).

Choose to add an additional set of amber or selective yellow lenses for greater performance in inclement weather conditions or to make your vehicle significantly more visible to other motorists on the road!

DR1 Light Capsule Features

  • High intensity series Cree LEDs with an output of 2190 lumens per pair
  • TriOptic™ multibeam lens system includes a Spot, Flood and Hybrid beam option in one pair of pods
  • DataDim™ equipped light modules allow plug and play connection and integrated dimming with DENALI lighting and dimming controllers.  
  • DrySeal™ submersible waterproof light housings can withstand the most extreme environments
  • Impact PC™ polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
  • LiveActive™ Thermal Management keeps LEDs cool by preventing loss of light output due to overheating
  • Low profile mounting bracket with stainless steel hardware included
  • An additional pair of E-Mark approved spot lenses included
  • Interchangeable lenses available in clear, amber and selective yellow 

DR1 Pod Specifications (Pair) 

  • LED: (2x)10 watt Cree XPL HI 
  • Power consumption: 1.6 amps 
  • Beam distance (spot): 1000 feet 
  • Beam Width (Spot): 75 feet 
  • Raw lumens: 2190 
  • DataDim™ Compatible: Yes
  • Operating voltage: 12 VDC
  • Pod size: 3.7 round x 3.8 deep (each)
  • Pod Weight: 1.45 lbs (each)
  • IP67 waterproof and submersible
  • E-Mark approved hybrid lenses 

What's in the box of DR1 light capsule- DNL.DR1.050

  • (1x) LED light capsule
  • (1x) Hybrid lens (included with kit)
  • (1x) Spot lens (installed)
  • (1x) M8 mounting hinge with stainless steel mounting hardware 
  • (1x) Wiring pigtail 

2-CANBUS CONTROLLER DENALI CANSMART™ GEN II-HONDA AFRICA TWIN 1100

Take advantage of the flexibility and intelligence of your Africa Twin's CAN bus electrical system to dramatically facilitate accessory installation with the new and improved DENALI CANsmart™ GEN II controller.

The DENALI CANsmart™ Controller offers plug-n-play installation and integrated control of up to four fixtures to enable dozens of customizable configurations that can be controlled directly from your Africa Twin switch group or CANsmart™ fixture management software. 

CANsmart's four circuits are pre-programmed to independently connect and control two DENALI light assemblies, a SoundBomb horn, and our B6 auxiliary brake light.  

Gen II: more features, more power, more versatile

Unlike the Gen I CANsmart, the Gen II's four circuits can provide a full 10 amps of continuous power and each circuit can be configured to run any type of accessory. Maximum power consumption for the entire unit remains at 30 amps continuous. The Gen II also features two new auxiliary light configurations. You can now modulate your auxiliary lights for greater visibility and set the left and right side lights to cancel independently when you activate their corresponding turn signal.   

Characteristics

  • High/Low Sync -Set the auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
  • ON/OFF and dimmed -Independently control two sets of ON/OFF lights and change the intensity level (for both day and night) directly from your original vehicles switches.
  • modular lights -Set the auxiliary lights to modulate to increase your visibility to other motorists.
  • Flash to pass -Do you need to get someone's attention? Press the high beam switch three times and the auxiliary lights will flash three times as fast.
  • Cancel with turn signal -This feature cancels the corresponding auxiliary light when you turn on your turn signal, preventing powerful auxiliary lights from overpowering your signal.
  • Reverse flashing with dangers -This feature flashes the auxiliary lights in reverse of the emergency lights, increasing visibility during roadside emergencies. 
  • Plug & Play Speaker Installation -Quickly and easily connect high-power replacement speakers like our SoundBomb™ without having to add an additional harness or relay.
  • Strobe light with horn -With this feature selected, the CANsmart™ software will automatically turn on the auxiliary lights when the horn sounds. This feature works whether you have the factory speaker or the SoundBomb™ speaker installed.
  • Smart Brake technology activated by deceleration -CANsmart™ reads the vehicle speed in real time to activate the auxiliary brake light during deceleration before you even hit the brake. You can adjust the sensitivity and the minimum speed at which the Smart Brake function will be activated.
  • Intermittent pattern braking -The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set the auxiliary brake lights to flash only when braking hard, flash continuously when the brake is applied, or flash four times quickly and then stay steady (California legal flashing speed).
  • Circuit function selector - The Circuit Function Selector in the CANsmart software will allow you to run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop-down menu and make your selection from the list of available circuit functions.
  • switching power supply -The CANsmart™ provides a universal accessory option that simply gives you clean 12V switched power. That means any accessory you plug into this circuit will turn on and off with your ignition.
  • delay timeout -You can also set the accessories in this circuit to have a delayed timeout. This will keep them on for up to 30 seconds after turning off the motorcycle.
  • Onboard power -Accessory circuit option is ideal for powering your GPS, phone, thermal equipment or cu
The unique oversized reflector on the DR1 creates an industry-leading 1000-foot beam distance from the single pair of 10-watt LEDs. No other 10 watt LED comes close. The DR1 is ideal for night driving conditions where maximum beam distance is desired. The included pair of True-Hybrid™ lenses has an official E-Mark certification and creates a more balanced combination of distance and width. Unlike the Gen I CANsmart, the Gen II's four circuits can provide a full 10 amps of continuous power and each circuit can be configured to run any type of accessory. Maximum power consumption for the entire unit remains at 30 amps continuous. The Gen II also features two new auxiliary light configurations. You can now modulate your auxiliary lights for greater visibility and set the left and right side l