☆ Welcome☆ to ☆ my ☆ shop ☆

Description:

BLDC wide voltage 6-50V high power 380W DC three-phase brushless non-inductive controller, Support PLC 0-5V PWM signal control
 
Interface Description:
1.MA MB MC phase line output motor
2. 5V GND motherboard with its own power supply (current does not exceed 30MA)
3.VCC GND Main motor power supply (external DC power supply)
4.SC speed pulse signal output
5. Forward and reverse forward and reverse control interface (can also lead external switch)
6.VR speed signal input (on-board potentiometer speed control can also be connected to external 0-5V analog PWM duty cycle support dual signal input speed control)
7. Brake
 
Motherboard specifications:
Product Name: 380W Brushless Hallless DC Motor Driver
Model: ZS-X11F
Working voltage: 6-50V
Maximum current: rated 16A peak 20A
Maximum power: 380W
Product size: length 63MM* width 45MM* height 30MM
Weight: About 76g
 
Overcurrent protection: no (external fuse is required)
Blocking protection: yes (the current will automatically drop after blocking)
Over temperature protection: yes (over 100, half of the power is reduced)
Maximum speed: 224000 RPM(2-pole motor), 74000 RPM(6-pole motor), 40000 RPM(12-pole motor), 35000RPM(14-pole motor)
 
Precautions:
1. The power supply circuit on the main board has no fuse, and the built-in self-addition will cause the chip on the board to be permanently damaged (even if it is 2 seconds).
2. During normal operation, there is sampling overcurrent protection at the motor output. Since the module power and current are very large, please do not short circuit when the module is not working normally. Once the short circuit has the possibility of burning the line, the first wiring test machine Please use small current and low voltage test, after ok, then pass high current and high voltage, because it is bare board module for sale, pay attention to the wiring line insulation, strong voltage is not allowed to touch the board parts.
3. Do not connect the motor that is obviously inconsistent with the voltage and current of the drive module or that is far away from each other.

Shipping list:

1Pcs SL-M77 6072A/12AY7 Tube Pre-amplifier Line and Phono Pre-AMP PCB Bare Board

Shipping

  • > We ship to worldwide.
  • > Orders processed within 24-48 hours after payment verification.
  • > We only ship to confirmed Paypal addresses. Your Paypal address MUST MATCH your Shipping address.

Country

Shipping Way

Shipping Time

Trackable

 United States

USPS(ePacket)

7-18

Yes

 Russia

China Post

15-35

Yes

 Other Country

Economic Air Mail

15-40

No

If you need register mail or other express shipping, Pls contact us. 
 
 

Warranty & Guarantee

  • > Good good quality. Buy with confidence!
  • > Returned & Guarantee. 
    If not satisfied with the item, you can choose to return it for a replacement or money back. 
  • We afford all cost if it's our fault. Exchange or refund.
    Please contact me before you return it. full refund     after we receive our original item.
  • > We maintain high standards of excellence StarStarStarStarStar and strive for 100% customer satisfaction!
     Positive feedback is very important to us. We request that you contact us
     BEFORE you give us neutral     Neutral feedback rating or negative Negative feedback rating feedback, so that we can satisfactorily address your concerns
 
 

Contact us

  • > Our goal is customer satisfaction!
  • > Our Working-time From 8:30 AM to 21:30 PM(GMT+08) .
  • > We strive to provide you with the best service, we will reply your question within 24 hours.
    ( IF have any problem, we will appreciate that you contact us first BEFORE open a dispute or request, we will try our best to solve the problem with you. )
 
 

Payment

  • > We accept Paypal only, It is fast, easy and safe.
  • > Payment must be completed within 7 days.
  • > PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
 

 

About me

    Please contact me first before you leave a negative review if my item are damaged or defective when you got it, I'll do resend or refund (as your choice) once I confirm with that, which is a most kind of favourable way to both of us work things out together.Your support and comprehension are highly appreciated for me. Thanks for everything, and at last, I full of expectation to do business with you!!!!